第一篇：专业英语感受 中英文对照
电力工程专业英语
Power engineering professional English
专业英语学习体会
英语作为一门重要的学科，正在由于科技的飞速发展、信息全球化、社会化的日趋接近以及国际语言的特殊身份而身价倍增，成为了跨入二十一世纪所必备的三张通行证之一。English as an important subject, is due to the rapid development of science and technology, the information globalization, the increasingly close to social special identity and values as well as the international language, has become the essential coming 21-st century one of the three pass.新的一代是否具备这张通行证将会直接影响祖国明天的辉煌。A new generation have this pass will directly affect the glory of the motherland tomorrow.从这个意义上说，通过学习英语来培养学生积极学习、主动探取的主体性品质以适应现代化社会的发展显得尤为必要。In this sense, through learning English to cultivate students' positive learning, active agent take the subjective quality of the development of the society it is necessary to adapt to the modernization尤其是我们当代研究生，掌握好英语，尤其是自己专业方面的外语，无论是对自己完成学业，还是未来找工作都有很重要的作用。Especially our contemporary graduate student, mastering English well, especially in foreign languages, in their major area of both finished school on their own, or in the future job has a very important role.通过这学期专业英语的学习，我学到了很多东西，更重要的是知道了学习专业英语的重要性。Through the study of professional English this term, I learned a lot of things, more important is to know the importance of learning English.首先，虽然我们以前已经学了很长时间的英语，但学的还远远不够。First of all, although we had for a long time to learn English, but learning is not enough因为我们学的英语基本上都是一些基础的、常用的表达，对于自己专业领域的一些词汇怎么表达还不了解。Because we learn English is essentially the expression of some basic and commonly used, some words how to say about their professional field is not understood.所以，学习专业英语是很必要的。尤其是随着地理学科的不断发展和新技术的广泛应用，对地理专业学生来说学习电力专业英语是必不可少的，也是吸取国外先进知识，进行国内外学术交流的基础。So, learning English is very necessary.Especially with the continuous development of geography and the wide application of new technology for geography majors to learn professional English is indispensable, and absorbing the foreign advanced knowledge, on the basis of domestic and international academic exchanges 因为英语作为世界上应用最广泛的一门语言，许多专业领域的文献和资料都是用英文书写的。Because English is the world the most widely used language in the world, many professional in the field of literature and data are written in English.如果我们想了解我们专业领域的最新研究成果，我们就必须学好专业英语，这样才能读懂自己专业方面的英文文献，使自己的研究跟上时代的步伐。
If we want to know we are professional in the field of the latest research results, we must learn English well, so you can read English literature in their
major area of, make oneself of the study to keep up with the pace of The Times.其次，随着中国国门的不断开放，我们与国外相关专家学者交流的机会将不断增多，这就需要我们掌握好英语——这张世界的通行证。Second, as China's doors open, us the opportunity to communicate with foreign related experts and scholars will continuously increase, this needs us to master English well, the world pass.如果我们不能很好的掌握自己研究领域的英文表达，那么在与国外专家交流时就会遇到这样那样问题，影响我们的正常交流。而一口流利的，专业词汇把握准确的英语，则会给对方留下深刻的印象，从而加深交流，真正达到交流的目的。可想而知，两者的差距。If we are not very good control over his research in the field of English expression, you will meet you when you communicate with foreign experts such as problem, affect our normal communication.And fluent, professional vocabulary to grasp English accurately, will leave deep impression to the other side, thus deepening exchanges, truly achieve the goal of communication.It is conceivable that the gap.最后，专业英语是高等学校研究生阶段各专业的一门重要辅助课程，是基础英语的延伸，其目的是为了拓宽学生的专业词汇量和阅读量，特别是强化英文表达方法，为将来的学术论文的阅读、写作和交流打下坚实的基础。Finally, specialized English is a high school graduate student stage is an important supplementary course of each professional is the extension of basic English, its purpose is to broaden the students' professional vocabulary and reading, especially to strengthen the English expression method, for the future of academic papers lay a solid foundation for reading, writing and communication.电力专业是个高新技术的学科，为了追踪该学科的动态并赶上国际水平，必须熟练的掌握该专业的英语词汇量及表达方式；Electricity is a high-tech professional disciplines, in order to track the dynamics of the discipline and catch up with the international level, must be skilled to master the professional English vocabulary and expressions;电力专业学生毕业后在很大程度上面临的是教学和科研，必须了解国内外地理理领域的最新动态，并需要经常查阅文献、写科研论文、参加学术会议等；The power professional students after graduation to a great extent, is facing the teaching and scientific research, must grasp the newest trend of domestic foreign LiLi field, and need to consult the literature often, write research papers, attending conferences, etc.;此外，毕业生就业实行双向选择，自主择业，人才市场对于复合型人才的需要越来越多。因此，电力专业英语课程的开设就显得尤为重要。In addition, graduate employment to realize two-way choice, choose their career, talent market need more and more interdisciplinary talents.English is particularly important, therefore, geographic location.对于专业英语这门课的建议有如下几点：For professional English this course suggestion as follows: 首先、希望可以把速度放慢些，不一定要讲那么多，但是讲过的句子都能讲清楚，重质不重量，因为英语句子就那几大种，当方法完全掌握便可举一反三。First of all, the hope can slow down the speed, don't have to speak so much, but can clearly spoken sentences, quality over quantity, because the English sentence that several big kinds, when master can extrapolate method completely.第二是，希望对于句子中的一些重要词汇、短语、句型要更加重视，特别是那些重要的，应该着重讲述，以实现记忆和应用。The second is that hope for some important words, phrases, sentence patterns in the sentence to pay more attention to, especially those that are important, should focus on, in order to realize the memory and the application.第三是，老师应该除了分析句子成分之外，还应该分析这个句子应该怎么翻译，有什么翻译技巧，通过怎样的翻译才能把句子翻译地流畅，翻译得好。The third is that the teacher should be in addition to the analysis of sentence composition, also should be analyzed should be how to translate this sentence, what translation skills, through the translation to translate the sentence with how smooth, is a good translation.最后，我真的觉得用这本书作为学习教材，不是那么地好，句子不适合四六级的谁平也不怎么针对考研。希望如果老师有时间，再换一个上课教材。而且发现我们老师对句子语法掌握的也不是那么系统，有很多是知道却很难说明白，建议老师看看何凯文的长难句。Finally, I really think that this book was used as learning materials, is not so good, the sentence is not suitable for the band 4 and band 6 who also don't for one's deceased father grind.Hope that if the teacher had the time, in another class teaching materials.And find that our teacher of a sentence grammar is not so system, there are a lot of know but it's hard to understand, suggested that the teacher see He Kaiwen long difficult sentences.
第二篇：机械专业英语文章中英文对照
英语原文
NUMERICAL CONTROL
Numerical control(N/C)is a form of programmable automation in which the processing equipment is controlled by means of numbers, letters, and other symbols, The numbers, letters, and symbols are coded in an appropriate format to define a program of instructions for a particular work part or job.When the job changes, the program of instructions is changed.The capability to change the program is what makes N/C suitable for low-and medium-volume production.It is much easier to write programs than to make major alterations of the processing equipment.There are two basic types of numerically controlled machine tools：point—to—point and continuous—path(also called contouring).Point—to—point machines use unsynchronized motors, with the result that the position of the machining head Can be assured only upon completion of a movement, or while only one motor is running.Machines of this type are principally used for straight—line cuts or for drilling or boring.The N/C system consists of the following components：data input, the tape reader with the control unit, feedback devices, and the metal—cutting machine tool or other type of N/C equipment.Data input, also called “man—to—control link”, may be provided to the machine tool manually, or entirely by automatic means.Manual methods when used as the sole source of input data are restricted to a relatively small number of inputs.Examples of manually operated devices are keyboard dials, pushbuttons, switches, or thumbwheel selectors.These are located on a console near the machine.Dials ale analog devices usually connected to a syn-chro-type resolver or potentiometer.In most cases, pushbuttons, switches, and other similar types of selectors are digital input devices.Manual input requires that the operator set the controls for each operation.It is a slow and tedious process and is seldom justified except in elementary machining applications or in special cases.In practically all cases, information is automatically supplied to the control unit and the machine tool by cards, punched tapes, or by magnetic tape.Eight—channel punched paper tape is the most commonly used form of data input for conventional N/C systems.The coded instructions on the tape consist of sections of punched holes called blocks.Each block represents a machine function, a machining operation, or a combination of the two.The entire N/C program on a tape is made up of an accumulation of these successive data blocks.Programs resulting in long tapes all wound on reels like motion-picture film.Programs on relatively short tapes may be continuously repeated by joining the two ends of the tape to form a loop.Once installed, the tape is used again and again without further handling.In this case, the operator simply loads and1
unloads the parts.Punched tapes ale prepared on type writers with special tape—punching attachments or in tape punching units connected directly to a computer system.Tape production is rarely error-free.Errors may be initially caused by the part programmer, in card punching or compilation, or as a result of physical damage to the tape during handling, etc.Several trial runs are often necessary to remove all errors and produce an acceptable working tape.While the data on the tape is fed automatically, the actual programming steps ale done manually.Before the coded tape may be prepared, the programmer, often working with a planner or a process engineer, must select the appropriate N/C machine tool, determine the kind of material to be machined, calculate the speeds and feeds, and decide upon the type of tooling needed.The dimensions on the part print are closely examined to determine a suitable zero reference point from which to start the program.A program manuscript is then written which gives coded numerical instructions describing the sequence of operations that the machine tool is required to follow to cut the part to the drawing specifications.The control unit receives and stores all coded data until a complete block of information has been accumulated.It then interprets the coded instruction and directs the machine tool through the required motions.The function of the control unit may be better understood by comparing it to the action of a dial telephone, where, as each digit is dialed, it is stored.When the entire number has been dialed, the equipment becomes activated and the call is completed.Silicon photo diodes, located in the tape reader head on the control unit, detect light as it passes through the holes in the moving tape.The light beams are converted to electrical energy, which is amplified to further strengthen the signal.The signals are then sent to registers in the control unit, where actuation signals are relayed to the machine tool drives.Some photoelectric devices are capable of reading at rates up to 1000 characters per second.High reading rates are necessary to maintain continuous machine—tool motion；otherwise dwell marks may be generated by the cutter on the part during contouring operations.The reading device must be capable of reading data blocks at a rate faster than the control system can process the data.A feedback device is a safeguard used on some N/C installations to constantly compensate for errors between the commanded position and the actual location of the moving slides of the machine tool.An N/C machine equipped with this kind of a direct feedback checking device has what is known as a closed-loop system.Positioning control is accomplished by a sensor which, during the actual operation, records the position of the slides and relays this information back to the control unit.Signals thus received ale compared to input signals on the tape, and any discrepancy between them is automatically rectified.In an alternative system, called an open—loop system, the machine is positioned solely by stepping motor drives in response to commands by a controllers.There is one basic type of NC motions.Point-to-point or Positional Control In point-to-point control the machine tool elements(tools, table, etc.)are moved to programmed locations and the machining operations performed
after the motions are completed.The path or speed of movement between locations is unimportant;only the coordinates of the end points of the motions are accurately controlled.This type of control is suitable for drill presses and some boring machines, where drilling, tapping, or boring operations must be performed at various locations on the work piece.Straight-Line or Linear Control Straight-Line control systems are able to move the cutting tool parallel to one of the major axes of the machine tool at a controlled rate suitable for machining.It is normally only possible to move in one direction at a time, so angular cuts on the work piece are not possible, consequently, for milling machines, only rectangular configurations can be machined or for lathes only surfaces parallel or perpendicular to the spindle axis can be machined.This type of controlled motion is often referred to as linear control or a half-axis of control.Machines with this form of control are also capable of point-to-point control.The original N/C used the closed—loop system.Of the two systems, closed and open loop, closed loop is more accurate and, as a consequence, is generally more expensive.Initially, open—loop systems were used almost entirely for light-duty applications because of inherent power limitations previously associated with conventional electric stepping motors.Recent advances in the development of electro hydraulic stepping motors have led to increasingly heavier machine load applications.中文译文
数控技术
数控是可编程自动化技术的一种形式,通过数字、字母和其他符号来控制加工设备。数字、字母和符号用适当的格式编码为一个特定工件定义指令程序。当工件改变时,指令程序就改变。这种改变程序的能力使数控适合于中、小批量生产,写一段新程序远比对加工设备做大的改动容易得多。
数控机床有两种基本形式：点位控制和连续控制(也称为轮廓控制)。点位控制机床采用异步电动机,因此,主轴的定位只能通过完成一个运动或一个电动机的转动来实现。这种机床主要用于直线切削或钻孔、镗孔等场合。
数控系统由下列组件组成：数据输入装置,带控制单元的磁带阅读机,反馈装置和切削机床或其他形式的数控设备。
数据输人装置,也称“人机联系装置”,可用人工或全自动方法向机床提供数据。人工方法作为输人数据唯一方法时,只限于少量输入。人工输入装置有键盘,拨号盘,按钮,开关或拨轮选择开关,这些都位于机床附近的一个控制台上。拨号盘通常连到一个同步解析器或电位计的模拟装置上。在大多数情况下,按钮、开关和其他类似的旋钮是数据输入元件。人工输入需要操作者控制每个操作,这是一个既慢又单调的过程,除了简单加工场合或特殊情况,已很少使用。
几乎所有情况下,信息都是通过卡片、穿孔纸带或磁带自动提供给控制单元。在传统的数控系统中,八信道穿孔纸带是最常用的数据输入形式,纸带上的编码指令由一系列称为程序块的穿孔组成。每一个程序块代表一种加工功能、一种操作或两者的组合。纸带上的整个数控程序由这些连续数据单元连接而成。带有程序的长带子像电影胶片一样绕在盘子上,相对较短的带子上的程序可通过将纸带两端连接形成一个循环而连续不断地重复使用。带子一旦安装好,就可反复使用而无需进一步处理。此时,操作者只是简单地上、下工件。穿孔纸带是在带有特制穿孔附件的打字机或直接连到计算机上的纸带穿孔装置上做成的。纸带制造很少不出错,错误可能由编程、卡片穿孔或编码、纸带穿孔时的物理损害等形成。通常,必须要试走几次来排除错误,才能得到一个可用的工作纸带。
虽然纸带上的数据是自动进给的,但实际编程却是手工完成的,在编码纸带做好前,编程者经常要和一个计划人员或工艺工程师一起工作,选择合适的数控机床,决定加工材料,计算切削速度和进给速度,决定所需刀具类型,仔细阅读零件图上尺寸,定下合适的程序开始的零参考点,然后写出程序清单,其上记载有描述加工顺序的编码数控指令,机床按顺序加工工件到图样要求。
控制单元接受和储存编码数据,直至形成一个完整的信息程序块,然后解释数控指令,并引导机床得到所需运动。
为更好理解控制单元的作用,可将它与拨号电话进行比较,即每拨一个数字,就储存一个,当整个数字拨好后,电话就被激活,也就完成了呼叫。
装在控制单元里的纸带阅读机,通过其内的硅光二极管,检测到穿过移动纸带上的孔漏
过的光线,将光束转变成电能,并通过放大来进一步加强信号,然后将信号送到控制单元里的寄存器,由它将动作信号传到机床驱动装置。
有些光电装置能以高达每秒1000个字节的速度阅读,这对保持机床连续动作是必须的,否则,在轮廓加工时,刀具可能在工件上产生划痕。阅读装置必须要能以比控制系统处理数据更快的速度来阅读数据程序块。
反馈装置是用在一些数控设备上的安全装置,它可连续补偿控制位置与机床运动滑台的实际位置之间的误差。装有这种直接反馈检查装置的数控机床有一个闭环系统装置。位置控制通过传感器实现,在实际工作时,记录下滑台的位置,并将这些信息送回控制单元。接受到的信号与纸带输入的信号相比较,它们之间的任何偏差都可得到纠正。
在另一个称为开环的系统中,机床仅由响应控制器命令的步进电动机驱动定位,工件的精度几乎完全取决于丝杠的精度和机床结构的刚度。有几个理由可以说明步进电机是一个自动化申请的非常有用的驱动装置。对于一件事物,它被不连续直流电压脉冲驱使,是来自数传计算机和其他的自动化的非常方便的输出控制系统。当多数是索引或其他的自动化申请所必备者的时候,步进电机对运行一个精确的有角进步也是理想的。因为控制系统不需要监听就提供特定的输出指令而且期待系统适当地反应的公开-环操作造成一个回应环,步进电机是理想的。一些工业的机械手使用高抬腿运步的马乘汽车驾驶员,而且步进电机是有用的在数字受约束的工作母机中。这些申请的大部分是公开-环 ,但是雇用回应环检测受到驱策的成份位置是可能的。环的一个分析者把真实的位置与需要的位置作比较,而且不同是考虑过的错误。那然后驾驶员能发行对步进电机的电脉冲,直到错误被减少对准零位。在这个系统中,没有信息反馈到控制单元的自矫正过程。出现误动作时,控制单元继续发出电脉冲。比如,一台数控铣床的工作台突然过载,阻力矩超过电机转矩时,将没有响应信号送回到控制器。因为,步进电机对载荷变化不敏感,所以许多数控系统设计允许电机停转。然而,尽管有可能损坏机床结构或机械传动系统,也有使用带有特高转矩步进电机的其他系统,此时,电动机有足够能力来应付系统中任何偶然事故。
最初的数控系统采用开环系统。在开、闭环两种系统中,闭环更精确,一般说来更昂贵。起初,因为原先传统的步进电动机的功率限制,开环系统几乎全部用于轻加工场合,最近出现的电液步进电动机已越来越多地用于较重的加工领域。
第三篇：计算机专业英语常用词汇(BIOS中英文对照)
计算机专业英语常用词汇（BIOS中英文对照）
Energy star（能源之星）Time/System Time（时间/系统时间）Boot POST 进行开机自检时（POST）硬件检查的水平：设置为“MINIMAL”（默认设置）则开
机自检仅在BIOS升级、内存模块更改或前一热键不可用。设置为“
Level 2 Cache（二级缓存）为“THOROUGH”则开机自检时执行全套硬件System Memory（系统内存）检查。
Video Controller（视频控制器）Config Warnings（警告设置：该选项用来设置在Panel Type（液晶屏型号）系统使用较低电压的电源适配器或其他不支Audio Controller（音频控制器）持的配置时是否报警，设置为“DISABLED”禁Modem Controller（调制解调器Modem）用报警，设置为“ENABLED”启用报警）Primary Hard Drive（主硬盘）Internal Modem（内置调制解调器：使用该选项可
启用或禁用内置Modem。禁用（disabled）后
Modular Bay（模块托架）Modem在操作系统中不可见。）Service Tag（服务标签）LAN Controller（网络控制器：使用该选项可启用Asset Tag（资产标签）或禁用PCI以太网控制器。禁用后该设备在操BIOS Version（BIOS版本）作系统中不可见。）
Boot Order/Boot Sequence（启动顺序，系统搜索PXE BIS策略：该选项控制系统在没有认证时如何操作系统文件的顺序）处理（启动整体服务Boot Integrity Diskette Drive（软盘驱动器）Services(BIS))授权请求。系统可以接受或拒绝Internal HDD（内置硬盘驱动器）BIS请求。设置为“Reset”时，在下次启动计算
机时BIS将重新初始化并设置为“Deny”。）
Floppy device（软驱设备）onboard Bluetooth（板载蓝牙设备）Hard-Disk Drive（硬盘驱动器）Mini PCI Device（Mini PCI 设备）USB Storage Device（USB存储设备）Mini PCI Status（Mini PCI 设备状态：在安装CD/DVD/CD-RW Drive（光驱）Mini PCI设备时可以使用该选项启用或禁用CD-ROM device（光驱）板载PCI设备）
Modular Bay HDD（模块化硬盘驱动器）Wireless Control（无线控制：使用该选项可
以设置Mini PCI和蓝牙无线设备的控制方式。
Onboard NIC（板载网卡或集成网卡）设置为“Application”时无线设备可以通过
“Quickset”等应用程序启用或禁用，
网络资料整理汇编：普洱学院 计算机科学系 最后编辑日期：2012年3月26日Off”时无线设备被禁用，并且不能在操作系统中启用。）Wireless（无线设备：使用该选项启用或禁用无线设备。该设置可以在操作系统中通过“Quickset”或“
External Hot Key（外部热键：该设置可以在外接AC Power Recovery（交流电源恢复：该选项可以“ENABLED”（默认设置）。如果希望操作系PS/2键盘上按照与使用笔记本电脑上的
键的相同的方式使用
使用ACPI操作系统，如Win2000或WinXP，Low Power Mode（低电量模式：该选项用来设置
则USB键盘不能使用
式下USB键盘才可以使用
“SCROLL LOCK”（默认选项）启用该功能，Brightness（亮度：该选项可以设置计算机启动时
设置为“NOT INSTALLED”禁用该功能。）显示器的亮度。计算机工作在电源供电状态下
时默认设置为一半。计算机工作在交流电源适
USB Emulation（USB仿真：使用该选项可以在不配器供电状态下时默认设置为最大。）
直接支持USB的操作系统中使用USB键盘、USB鼠标及USB软驱。该设置在BIOS启动Wakeup On LAN（网络唤醒：该选项设置允许在过程中自动启用。启用该功能后，控制转移到网络信号接入时将电脑从休眠状态唤醒。该设
操作系统时仿真继续有效。禁用该功能后在控置对待机状态（Standby state）无效。只能在制转移到操作系统时仿真关闭。）操作系统中唤醒待机状态。该设置仅在接有交
流电源适配器时有效。）
Pointing Device（指针设备：设置为“SERIAL
MOUSE”时外接串口鼠标启用并集成触摸板Auto On Mode（自动开机模式：注意若交流电源
被禁用。设置为“PS/2 MOUSE”时，若外接PS/2适配器没有接好，该设置将无法生效。该选项
鼠标，则禁用集成触摸板。设置为“TOUCH 可设置计算机自动开机时间，可以设置将计算
PAD-PS/2 MOUSE”（默认设置）时，若外接机每天自动开机或仅在工作日自动开机。设置
PS/2鼠标，可以在鼠标与触摸板间切换。更改在计算机重新启动后生效。）
在计算机重新启动后生效）Auto On Time（自动开机时间：该选项可设置系
Video Expansion（视频扩展：使用该选项可以启统自动开机的时间，时间格式为24小时制。
用或禁用视频扩展，将较低的分辨率调整为较键入数值或使用左、右箭头键设定数值。设置
高的、正常的LCD分辨率。）在计算机重新启动后生效。）
Battery（电池）Dock Configuration（坞站配置）Battery Status（电池状态）Docking Status（坞站状态）
Power Management（电源管理）Universal Connect（通用接口：若所用操作系统为
WinNT4.0或更早版本，该设置无效。如果经
Suspend Mode（挂起模式）常使用不止一个戴尔坞站设备，并且希望最小
化接入坞站时的初始时间，设置为
统对计算机连接的每个新的坞站设备都生成新的系统设置文件，设置为“DISABLED”。）System Security（系统安全）Primary Password（主密码）Admin Password（管理员密码）Hard-disk drive password(s)（硬盘驱动器密码）Password Status（密码状态：该选项用来在Setup密码启用时锁定系统密码。将该选项设置为“Locked”并启用Setup密码以放置系统密码被更改。该选项还可以用来放置在系统启动时密码被用户禁用。）System Password（系统密码）Setup Password（设置密码）Post Hotkeys（自检热键：该选项用来指定在开机自检（POST）时屏幕上显示的热键（F2或F12）。）Chassis Intrusion（机箱防盗：该选项用来启用或禁用机箱防盗检测特征。设置为“Enable-Silent”时，启动时若检测到底盘入侵，不发送警告信息。该选项启用并且机箱盖板打开时，该域将显示“DETECTED”。）Drive Configuration（驱动器设置）Diskette Drive A:（磁盘驱动器A:如果系统中装有软驱，使用该选项可启用或禁用软盘驱动器）Primary Master Drive（第一主驱动器）Primary Slave Drive（第一从驱动器）Secondary Master Drive（第二主驱动器）
Secondary Slave Drive（第二从驱动器）Sound（声音设置：使用该选项可启用或禁用音频Diskette Interface（磁盘接口：使用该选项可以设IDE Drive UDMA（支持UDMA的IDE驱动器：控制器）
使用该选项可以启用或禁用通过内部IDE硬Network Interface Controller（网络接口控制器：启
盘接口的DMA传输。）用或禁用集成网卡）
Hard-Disk drive Sequence（硬盘驱动器顺序）Mouse Port（鼠标端口：使用该选项可启用或禁用
System BIOS boot devices（系统BIOS启动顺序）内置PS/2兼容鼠标控制器）
USB device（USB设备）USB Controller（USB控制器：使用该选项可启用
Memory Information（内存信息）或禁用板载USB控制器。）
Installed System Memory（系统内存：该选项显示PCI Slots（PCI槽：使用该选项可启用或禁用板载
系统中所装内存的大小及型号）PCI卡槽。禁用时所有PCI插卡都不可用，并
System Memory Speed（内存速率：该选项显示所且不能被操作系统检测到。）
装内存的速率）Serial Port 1（串口1：使用该选项可控制内置串口
System Memory Channel Mode（内存信道模式：的操作。设置为“AUTO”时，如果通过串口扩
该选项显示内存槽设置。）展卡在同一个端口地址上使用了两个设备，内
置串口自动重新分配可用端口地址。串口先使
AGP Aperture(AGP区域内存容量：该选项指定了用COM1，再使用COM2，如果两个地址都已
分配给视频适配器的内存值。某些视频适配器经分配给某个端口，该端口将被禁用。）
可能要求多于默认值的内存量。)Parallel Port（并口：该域中可配置内置并口）
CPU information(CPU信息)Mode（模式：设置为“AT”时内置并口仅能输出数
CPU Speed（CPU速率：该选项显示启动后中央据到相连设备。设置为PS/
2、EPP或ECP模
处理器的运行速率）式时并口可以输入、输出数据。这三种模式所
Bus Speed（总线速率：显示处理器总线速率）用协议和最大数据传输率不同。最大传输速率
Processor 0 ID 处理器ID：显示处理器所属种类及PS/2 模型号通道，进一步改进输出量。） Clock Speed（时钟频率）I/O Address（输入/输出地址） Cache Size（缓存值：显示处理器的二级缓存值）DMA Channel（DMA通道：使用该选项可以设置 Integrated Devices(LegacySelect Options)集成设备并口所用的DMA通道。该选项仅在并口设置 为“ECP”时可用。） 置内置软盘驱动器的操作。设置为AUTO时，若装有软驱，则内置磁盘控制器被禁用。若没有检测到磁盘控制器，则启用内置控制器。）PC Speaker（系统喇叭：使用该选项可启用或禁用系统喇叭）Primary Video Controller（主视频控制器：使用该选项可以在启动过程中指定视频控制器。设置为“AUTO”时若装有内置显卡，系统可以使用。否则系统将使用板载视频控制器。设置为“Onboard”时系统总是使用板载控制器）Onboard Video Buffer（板载显卡缓存）Report Keyboard Errors（键盘报错）Auto Power On（自动开机）Auto Power On Mode（自动开机模式）Auto Power On Time（自动开机时间）Remote Wake Up（远程唤醒：该选项设置为“ON”时，若网卡或有远程唤醒功能的调制解调器收到唤醒信号时，系统将被唤醒。该选项设置为“On w/Boot to NIC 时”，系统启动时首先尝试网络启动。）Fast Boot（快速启动：该选项在操作系统请求精简启动时系统启动的速度。）IDE Hard Drive Acoustics Mode（IDE硬盘声音模式）System Event Log（系统事件日志） Types of Materials 材料的类型 Materials may be grouped in several ways.Scientists often classify materials by their state: solid, liquid, or gas.They also separate them into organic(once living)and inorganic(never living)materials.材料可以按多种方法分类。科学家常根据状态将材料分为：固体、液体或气体。他们也把材料分为有机材料(曾经有生命的)和无机材料(从未有生命的)。 For industrial purposes, materials are divided into engineering materials or nonengineering materials.Engineering materials are those used in manufacture and become parts of products.就工业效用而言，材料被分为工程材料和非工程材料。那些用于加工制造并成为产品组成部分的就是工程材料。 Nonengineering materials are the chemicals, fuels, lubricants, and other materials used in the manufacturing process, which do not become part of the product.非工程材料则是化学品、燃料、润滑剂以及其它用于加工制造过程但不成为产品组成部分的材料。 Engineering materials may be further subdivided into: ①Metal ②Ceramics ③Composite ④Polymers, etc.工程材料还能进一步细分为：①金属材料②陶瓷材料③复合材料 ④聚合材料，等等。 Metals and Metal Alloys 金属和金属合金 Metals are elements that generally have good electrical and thermal conductivity.Many metals have high strength, high stiffness, and have good ductility.金属就是通常具有良好导电性和导热性的元素。许多金属具有高强度、高硬度以及良好的延展性。 Some metals, such as iron, cobalt and nickel, are magnetic.At low temperatures, some metals and intermetallic compounds become superconductors.某些金属能被磁化，例如铁、钴和镍。在极低的温度下，某些金属和金属化合物能转变成超导体。 What is the difference between an alloy and a pure metal? Pure metals are elements which come from a particular area of the periodic table.Examples of pure metals include copper in electrical wires and aluminum in cooking foil and beverage cans.合金与纯金属的区别是什么？纯金属是在元素周期表中占据特定位置的元素。 例如电线中的铜和制造烹饪箔及饮料罐的铝。 Alloys contain more than one metallic element.Their properties can be changed by changing the elements present in the alloy.Examples of metal alloys include stainless steel which is an alloy of iron, nickel, and chromium;and gold jewelry which usually contains an alloy of gold and nickel.合金包含不止一种金属元素。合金的性质能通过改变其中存在的元素而改变。金属合金的例子有：不锈钢是一种铁、镍、铬的合金，以及金饰品通常含有金镍合金。 Why are metals and alloys used? Many metals and alloys have high densities and are used in applications which require a high mass-to-volume ratio.为什么要使用金属和合金？许多金属和合金具有高密度，因此被用在需要较高质量体积比的场合。 Some metal alloys, such as those based on aluminum, have low densities and are used in aerospace applications for fuel economy.Many alloys also have high fracture toughness, which means they can withstand impact and are durable.某些金属合金，例如铝基合金，其密度低，可用于航空航天以节约燃料。许多合金还具有高断裂韧性，这意味着它们能经得起冲击并且是耐用的 What are some important properties of metals? Density is defined as a material’s mass divided by its volume.Most metals have relatively high densities, especially compared to polymers.金属有哪些重要特性？ 密度定义为材料的质量与其体积之比。大多数金属密度相对较高，尤其是和聚合物相比较而言。 Materials with high densities often contain atoms with high atomic numbers, such as gold or lead.However, some metals such as aluminum or magnesium have low densities, and are used in applications that require other metallic properties but also require low weight.高密度材料通常由较大原子序数原子构成，例如金和铅。然而，诸如铝和镁之类的一些金属则具有低密度，并被用于既需要金属特性又要求重量轻的场合。 Fracture toughness can be described as a material’s ability to avoid fracture, especially when a flaw is introduced.Metals can generally contain nicks and dents without weakening very much, and are impact resistant.A football player counts on this when he trusts that his facemask won’t shatter.断裂韧性可以描述为材料防止断裂特别是出现缺陷时不断裂的能力。金属一般能在有缺口和凹痕的情况下不显著削弱，并且能抵抗冲击。橄榄球运动员据此相信他的面罩不会裂成碎片。 Plastic deformation is the ability of bend or deform before breaking.As engineers, we usually design materials so that they don’t deform under normal conditions.You don’t want your car to lean to the east after a strong west wind.塑性变形就是在断裂前弯曲或变形的能力。作为工程师，设计时通常要使材料在正常条件下不变形。没有人愿意一阵强烈的西风过后自己的汽车向东倾斜。 However, sometimes we can take advantage of plastic deformation.The crumple zones in a car absorb energy by undergoing plastic deformation before they break.然而，有时我们也能利用塑性变形。汽车上压皱的区域在它们断裂前通过经历塑性变形来吸收能量。 The atomic bonding of metals also affects their properties.In metals, the outer valence electrons are shared among all atoms, and are free to travel everywhere.Since electrons conduct heat and electricity, metals make good cooking pans and electrical wires.金属的原子连结对它们的特性也有影响。在金属内部，原子的外层阶电子由所有原子共享并能到处自由移动。由于电子能导热和导电，所以用金属可以制造好的烹饪锅和电线。 It is impossible to see through metals, since these valence electrons absorb any photons of light which reach the metal.No photons pass through.因为这些阶电子吸收到达金属的光子，所以透过金属不可能看得见。没有光子 能通过金属。 Alloys are compounds consisting of more than one metal.Adding other metals can affect the density, strength, fracture toughness, plastic deformation, electrical conductivity and environmental degradation.合金是由一种以上金属组成的混合物。加一些其它金属能影响密度、强度、断裂韧性、塑性变形、导电性以及环境侵蚀。 For example, adding a small amount of iron to aluminum will make it stronger.Also, adding some chromium to steel will slow the rusting process, but will make it more brittle.例如，往铝里加少量铁可使其更强。同样，在钢里加一些铬能减缓它的生锈过程，但也将使它更脆。 Ceramics and Glasses 陶瓷和玻璃 A ceramic is often broadly defined as any inorganic nonmetallic material． By this definition, ceramic materials would also include glasses;however, many materials scientists add the stipulation that “ceramic” must also be crystalline.陶瓷通常被概括地定义为无机的非金属材料。照此定义，陶瓷材料也应包括玻璃；然而许多材料科学家添加了“陶瓷”必须同时是晶体物组成的约定。 A glass is an inorganic nonmetallic material that does not have a crystalline structure.Such materials are said to be amorphous.玻璃是没有晶体状结构的无机非金属材料。这种材料被称为非结晶质材料。Properties of Ceramics and Glasses Some of the useful properties of ceramics and glasses include high melting temperature, low density, high strength, stiffness, hardness, wear resistance, and corrosion resistance.陶瓷和玻璃的特性 高熔点、低密度、高强度、高刚度、高硬度、高耐磨性和抗腐蚀性是陶瓷和玻璃的一些有用特性。 Many ceramics are good electrical and thermal insulators.Some ceramics have special properties: some ceramics are magnetic materials;some are piezoelectric materials;and a few special ceramics are superconductors at very low temperatures.Ceramics and glasses have one major drawback: they are brittle.许多陶瓷都是电和热的良绝缘体。某些陶瓷还具有一些特殊性能：有些是磁性材料，有些是压电材料，还有些特殊陶瓷在极低温度下是超导体。陶瓷和玻璃都有一个主要的缺点：它们容易破碎。 Ceramics are not typically formed from the melt.This is because most ceramics will crack extensively(i.e.form a powder)upon cooling from the liquid state.陶瓷一般不是由熔化形成的。因为大多数陶瓷在从液态冷却时将会完全破碎(即形成粉末)。 Hence, all the simple and efficient manufacturing techniques used for glass production such as casting and blowing, which involve the molten state, cannot be used for the production of crystalline ceramics.Instead, “sintering” or “firing” is the process typically used.因此，所有用于玻璃生产的简单有效的—诸如浇铸和吹制这些涉及熔化的技术都不能用于由晶体物组成的陶瓷的生产。作为替代，一般采用“烧结”或“焙烧”工艺。 In sintering, ceramic powders are processed into compacted shapes and then heated to temperatures just below the melting point.At such temperatures, the powders react internally to remove porosity and fully dense articles can be obtained.在烧结过程中，陶瓷粉末先挤压成型然后加热到略低于熔点温度。在这样的温度下，粉末内部起反应去除孔隙并得到十分致密的物品。 An optical fiber contains three layers: a core made of highly pure glass with a high refractive index for the light to travel, a middle layer of glass with a lower refractive index known as the cladding which protects the core glass from scratches and other surface imperfections, and an out polymer jacket to protect the fiber from damage.光导纤维有三层：核心由高折射指数高纯光传输玻璃制成，中间层为低折射指数玻璃，是保护核心玻璃表面不被擦伤和完整性不被破坏的所谓覆层，外层是聚合物护套，用于保护光导纤维不受损。 In order for the core glass to have a higher refractive index than the cladding, the core glass is doped with a small, controlled amount of an impurity, or dopant, which causes light to travel slower, but does not absorb the light.为了使核心玻璃有比覆层大的折射指数，在其中掺入微小的、可控数量的能减缓光速而不会吸收光线的杂质或搀杂剂。 Because the refractive index of the core glass is greater than that of the cladding, light traveling in the core glass will remain in the core glass due to total internal reflection as long as the light strikes the core/cladding interface at an angle greater than the critical angle.由于核心玻璃的折射指数比覆层大，只要在全内反射过程中光线照射核心/覆层分界面的角度比临界角大，在核心玻璃中传送的光线将仍保留在核心玻璃中。 The total internal reflection phenomenon, as well as the high purity of the core glass, enables light to travel long distances with little loss of intensity.全内反射现象与核心玻璃的高纯度一样，使光线几乎无强度损耗传递长距离成为可能。 Composites 复合材料 Composites are formed from two or more types of materials.Examples include polymer/ceramic and metal/ceramic composites.Composites are used because overall properties of the composites are superior to those of the individual components.复合材料由两种或更多材料构成。例子有聚合物/陶瓷和金属/陶瓷复合材料。之所以使用复合材料是因为其全面性能优于组成部分单独的性能。 For example: polymer/ceramic composites have a greater modulus than the polymer component, but aren’t as brittle as ceramics.Two types of composites are: fiber-reinforced composites and particle-reinforced composites.例如：聚合物/陶瓷复合材料具有比聚合物成分更大的模量，但又不像陶瓷那样易碎。 复合材料有两种：纤维加强型复合材料和微粒加强型复合材料。Fiber-reinforced Composites Reinforcing fibers can be made of metals, ceramics, glasses, or polymers that have been turned into graphite and known as carbon fibers.Fibers increase the modulus of the matrix material.纤维加强型复合材料 加强纤维可以是金属、陶瓷、玻璃或是已变成石墨的被称为碳纤维的聚合物。纤维能加强基材的模量。 The strong covalent bonds along the fiber’s length give them a very high modulus in this direction because to break or extend the fiber the bonds must also be broken or moved.沿着纤维长度有很强结合力的共价结合在这个方向上给予复合材料很高的模量，因为要损坏或拉伸纤维就必须破坏或移除这种结合。 Fibers are difficult to process into composites, making fiber-reinforced composites relatively expensive.把纤维放入复合材料较困难，这使得制造纤维加强型复合材料相对昂贵。Fiber-reinforced composites are used in some of the most advanced, and therefore most expensive sports equipment, such as a time-trial racing bicycle frame which consists of carbon fibers in a thermoset polymer matrix.纤维加强型复合材料用于某些最先进也是最昂贵的运动设备，例如计时赛竞赛用自行车骨架就是用含碳纤维的热固塑料基材制成的。 Body parts of race cars and some automobiles are composites made of glass fibers(or fiberglass)in a thermoset matrix.竞赛用汽车和某些机动车的车体部件是由含玻璃纤维(或玻璃丝)的热固塑料基材制成的。 Fibers have a very high modulus along their axis, but have a low modulus perpendicular to their axis.Fiber composite manufacturers often rotate layers of fibers to avoid directional variations in the modulus.纤维在沿着其轴向有很高的模量，但垂直于其轴向的模量却较低。纤维复合材料的制造者往往旋转纤维层以防模量产生方向变化。 Particle-reinforced composites Particles used for reinforcing include ceramics and glasses such as small mineral particles, metal particles such as aluminum, and amorphous materials, including polymers and carbon black.微粒加强型复合材料[番茄用户1] [番茄用户2] [番茄用户3] [番茄用户4] [番茄用户5] [番茄用户6] 用于加强的微粒包含了陶瓷和玻璃之类的矿物微粒，铝之类的金属微粒以及包括聚合物和碳黑的非结晶质微粒。 Particles are used to increase the modulus of the matrix, to decrease the permeability of the matrix, to decrease the ductility of the matrix.An example of particle-reinforced composites is an automobile tire which has carbon black particles in a matrix of polyisobutylene elastomeric polymer.微粒用于增加基材的模量、减少基材的渗透性和延展性。微粒加强型复合材料的一个例子是机动车胎，它就是在聚异丁烯人造橡胶聚合物基材中加入了碳黑微粒。 Polymers 聚合材料 A polymer has a repeating structure, usually based on a carbon backbone.The repeating structure results in large chainlike molecules.Polymers are useful because they are lightweight, corrosion resistant, easy to process at low temperatures and generally inexpensive.聚合物具有一般是基于碳链的重复结构。这种重复结构产生链状大分子。由于重量轻、耐腐蚀、容易在较低温度下加工并且通常较便宜，聚合物是很有用的。 Some important characteristics of polymers include their size(or molecular weight), softening and melting points, crystallinity, and structure.The mechanical properties of polymers generally include low strength and high toughness.Their strength is often improved using reinforced composite structures.聚合材料具有一些重要特性，包括尺寸(或分子量)、软化及熔化点、结晶度和结构。聚合材料的机械性能一般表现为低强度和高韧性。它们的强度通常可采用加强复合结构来改善。 Important Characteristics of Polymers Size.Single polymer molecules typically have molecular weights between 10,000 and 1,000,000g/mol—that can be more than 2,000 repeating units depending on the polymer structure!聚合材料的重要特性 尺寸：单个聚合物分子一般分子量为10,000到1,000,000g/mol之间，具体取决于聚合物的结构—这可以比2,000个重复单元还多。 The mechanical properties of a polymer are significantly affected by the molecular weight, with better engineering properties at higher molecular weights.聚合物的分子量极大地影响其机械性能，分子量越大，工程性能也越好。Thermal transitions.The softening point(glass transition temperature)and the melting point of a polymer will determine which it will be suitable for applications.These temperatures usually determine the upper limit for which a polymer can be used.热转换性：聚合物的软化点(玻璃状转化温度)和熔化点决定了它是否适合应用。这些温度通常决定聚合物能否使用的上限。 For example, many industrially important polymers have glass transition temperatures near the boiling point of water(100℃, 212℉), and they are most useful for room temperature applications.Some specially engineered polymers can withstand temperatures as high as 300℃(572℉).例如，许多工业上的重要聚合物其玻璃状转化温度接近水的沸点(100℃，212℉)，它们被广泛用于室温下。而某些特别制造的聚合物能经受住高达300℃(572℉)的温度。 Crystallinity.Polymers can be crystalline or amorphous, but they usually have a combination of crystalline and amorphous structures(semi-crystalline).结晶度：聚合物可以是晶体状的或非结晶质的，但它们通常是晶体状和非结晶质结构的结合物(半晶体)。 Interchain interactions.The polymer chains can be free to slide past one another(thermo-plastic)or they can be connected to each other with crosslinks(thermoset or elastomer).Thermo-plastics can be reformed and recycled, while thermosets and elastomers are not reworkable.原子链间的相互作用：聚合物的原子链可以自由地彼此滑动(热可塑性)或通过交键互相连接(热固性或弹性)。热可塑性材料可以重新形成和循环使用，而热固性与弹性材料则是不能再使用的。 Intrachain structure.The chemical structure of the chains also has a tremendous effect on the properties.Depending on the structure the polymer may be hydrophilic or hydrophobic(likes or hates water), stiff or flexible, crystalline or amorphous, reactive or unreactive.链内结构：原子链的化学结构对性能也有很大影响。根据各自的结构不同，聚合物可以是亲水的或憎水的(喜欢或讨厌水)、硬的或软的、晶体状的或非结晶质的、易起反应的或不易起反应的。 The understanding of heat treatment is embraced by the broader study of metallurgy.Metallurgy is the physics, chemistry, and engineering related to metals from ore extraction to the final product.对热处理的理解包含于对冶金学较广泛的研究。冶金学是物理学、化学和涉及金属从矿石提炼到最后产物的工程学。 Heat treatment is the operation of heating and cooling a metal in its solid state to change its physical properties.According to the procedure used, steel can be hardened to resist cutting action and abrasion, or it can be softened to permit machining.热处理是将金属在固态加热和冷却以改变其物理性能的操作。按所采用的步骤，钢可以通过硬化来抵抗切削和磨损，也可以通过软化来允许机加工。 With the proper heat treatment internal stresses may be removed, grain size reduced, toughness increased, or a hard surface produced on a ductile interior.The analysis of the steel must be known because small percentages of certain elements, notably carbon, greatly affect the physical properties.使用合适的热处理可以去除内应力、细化晶粒、增加韧性或在柔软材料上覆盖坚硬的表面。因为某些元素(尤其是碳)的微小百分比极大地影响物理性能，所以必须知道对钢的分析。 Alloy steel owe their properties to the presence of one or more elements other than carbon, namely nickel, chromium, manganese, molybdenum, tungsten, silicon, vanadium, and copper.Because of their improved physical properties they are used commercially in many ways not possible with carbon steels.合金钢的性质取决于其所含有的除碳以外的一种或多种元素，如镍、铬、锰、钼、钨、硅、钒和铜。由于合金钢改善的物理性能，它们被大量使用在许多碳钢不适用的地方。 The following discussion applies principally to the heat treatment of ordinary commercial steels known as plain carbon steels.With this process the rate of cooling is the controlling factor, rapid cooling from above the critical range results in hard structure, whereas very slow cooling produces the opposite effect.下列讨论主要针对被称为普通碳钢的工业用钢而言。热处理时冷却速率是控制要素，从高于临界温度快速冷却导致坚硬的组织结构，而缓慢冷却则产生相反效果。 A Simplified Iron-carbon Diagram 简化铁碳状态图 If we focus only on the materials normally known as steels, a simplified diagram is often used.如果只把注意力集中于一般所说的钢上，经常要用到简化铁碳状态图。 Those portions of the iron-carbon diagram near the delta region and those above 2% carbon content are of little importance to the engineer and are deleted.A simplified diagram, such as the one in Fig.2.1, focuses on the eutectoid region and is quite useful in understanding the properties and processing of steel.铁碳状态图中靠近三角区和含碳量高于2%的那些部分对工程师而言不重要，因此将它们删除。如图2.1所示的简化铁碳状态图将焦点集中在共析区，这对理解钢的性能和处理是十分有用的。 The key transition described in this diagram is the decomposition of single-phase austenite(γ)to the two-phase ferrite plus carbide structure as temperature drops.在此图中描述的关键转变是单相奥氏体(γ)随着温度下降分解成两相铁素体加渗碳体组织结构。 Control of this reaction, which arises due to the drastically different carbon solubility of austenite and ferrite, enables a wide range of properties to be achieved through heat treatment.控制这一由于奥氏体和铁素体的碳溶解性完全不同而产生的反应，使得通过热处理能获得很大范围的特性。 To begin to understand these processes, consider a steel of the eutectoid composition, 0.77% carbon, being slow cooled along line x-x’ in Fig.2.1.At the upper temperatures, only austenite is present, the 0.77% carbon being dissolved in solid solution with the iron.When the steel cools to 727℃(1341℉), several changes occur simultaneously.为了理解这些过程，考虑含碳量为0.77%的共析钢，沿着图2.1的x-x’线慢慢冷却。在较高温度时，只存在奥氏体，0.77%的碳溶解在铁里形成固溶体。当钢冷却到727℃(1341℉)时，将同时发生若干变化。 The iron wants to change from the FCC austenite structure to the BCC ferrite structure, but the ferrite can only contain 0.02% carbon in solid solution.铁需要从面心立方体奥氏体结构转变为体心立方体铁素体结构，但是铁素体只能容纳固溶体状态的0.02%的碳。 The rejected carbon forms the carbon-rich cementite intermetallic with composition Fe3C.In essence, the net reaction at the eutectoid is austenite 0.77%C→ferrite 0.02%C+cementite 6.67%C.被析出的碳与金属化合物Fe3C形成富碳的渗碳体。本质上，共析体的基本反应是奥氏体0.77%的碳→铁素体0.02%的碳+渗碳体6.67%的碳。 Since this chemical separation of the carbon component occurs entirely in the solid state, the resulting structure is a fine mechanical mixture of ferrite and cementite.Specimens prepared by polishing and etching in a weak solution of nitric acid and alcohol reveal the lamellar structure of alternating plates that forms on slow cooling.由于这种碳成分的化学分离完全发生在固态中，产生的组织结构是一种细致的铁素体与渗碳体的机械混合物。通过打磨并在弱硝酸酒精溶液中蚀刻制备的样本显示出由缓慢冷却形成的交互层状的薄片结构。 This structure is composed of two distinct phases, but has its own set of characteristic properties and goes by the name pearlite, because of its resemblance to mother-of-pearl at low magnification.这种结构由两种截然不同的状态组成，但它本身具有一系列特性，且因与低倍数放大时的珠母层有类同之处而被称为珠光体。 Steels having less than the eutectoid amount of carbon(less than 0.77%)are known as hypo-eutectoid steels.Consider now the transformation of such a material represented by cooling along line y-y’ in Fig.2.1.含碳量少于共析体(低于0.77%)的钢称为亚共析钢。现在来看这种材料沿着图2.1中y-y’ 线冷却的转变情况。 At high temperatures, the material is entirely austenite, but upon cooling enters a region where the stable phases are ferrite and austenite.Tie-line and level-law calculations show that low-carbon ferrite nucleates and grows, leaving the remaining austenite richer in carbon.在较高温度时，这种材料全部是奥氏体，但随着冷却就进入到铁素体和奥氏体稳定状态的区域。由截线及杠杆定律分析可知，低碳铁素体成核并长大，剩下含碳 量高的奥氏体。 At 727℃(1341℉), the austenite is of eutectoid composition(0.77% carbon)and further cooling transforms the remaining austenite to pearlite.The resulting structure is a mixture of primary or pro-eutectoid ferrite(ferrite that formed above the eutectoid reaction)and regions of pearlite.在727℃(1341℉)时，奥氏体为共析组成(含碳量0.77%)，再冷却剩余的奥氏体就转化为珠光体。作为结果的组织结构是初步的共析铁素体(在共析反应前的铁素体)和部分珠光体的混合物。 Hypereutectoid steels are steels that contain greater than the eutectoid amount of carbon.When such steel cools, as shown in z-z’ of Fig.2.1 the process is similar to the hypo-eutectoid case, except that the primary or pro-eutectoid phase is now cementite instead of ferrite.过共析钢是含碳量大于共析量的钢。当这种钢冷却时，就像图2.1的z-z’线所示，除了初步的共析状态用渗碳体取代铁素体外，其余类似亚共析钢的情况。 As the carbon-rich phase forms, the remaining austenite decreases in carbon content, reaching the eutectoid composition at 727℃(1341℉).As before, any remaining austenite transforms to pearlite upon slow cooling through this temperature.随着富碳部分的形成，剩余奥氏体含碳量减少，在727℃(1341℉)时达到共析组 织。就像以前说的一样，当缓慢冷却到这温度时所有剩余奥氏体转化为珠光体。 It should be remembered that the transitions that have been described by the phase diagrams are for equilibrium conditions, which can be approximated by slow cooling.With slow heating, these transitions occur in the reverse manner.应该记住由状态图描述的这种转化只适合于通过缓慢冷却的近似平衡条件。如果缓慢加热，则以相反的方式发生这种转化。 However, when alloys are cooled rapidly, entirely different results may be obtained, because sufficient time is not provided for the normal phase reactions to occur, in such cases, the phase diagram is no longer a useful tool for engineering analysis.然而，当快速冷却合金时，可能得到完全不同的结果。因为没有足够的时间让正常的状态反应发生，在这种情况下对工程分析而言状态图不再是有用的工具。 Hardening 淬火 Hardening is the process of heating a piece of steel to a temperature within or above its critical range and then cooling it rapidly.淬火就是把钢件加热到或超过它的临界温度范围，然后使其快速冷却的过程。If the carbon content of the steel is known, the proper temperature to which the steel should be heated may be obtained by reference to the iron-iron carbide phase diagram.However, if the composition of the steel is unknown, a little preliminary experimentation may be necessary to determine the range.如果钢的含碳量已知，钢件合适的加热温度可参考铁碳合金状态图得到。然而当钢的成分不知道时，则需做一些预备试验来确定其温度范围。 A good procedure to follow is to heat-quench a number of small specimens of the steel at various temperatures and observe the result, either by hardness testing or by microscopic examination.When the correct temperature is obtained, there will be a marked change in hardness and other properties.要遵循的合适步骤是将这种钢的一些小试件加热到不同的温度后淬火，再通过硬度试验或显微镜检查观测结果。一旦获得正确的温度，硬度和其它性能都将有明显的变化。 In any heat-treating operation the rate of heating is important.Heat flows from the exterior to the interior of steel at a definite rate.If the steel is heated too fast, the outside becomes hotter than the interior and uniform structure cannot be obtained.在任何热处理作业中，加热的速率都是重要的。热量以一定的速率从钢的外部传导到内部。如果钢被加热得太快，其外部比内部热就不能得到均匀的组织结构。 If a piece is irregular in shape, a slow rate is all the more essential to eliminate warping and cracking.The heavier the section, the longer must be the heating time to achieve uniform results.如果工件形状不规则，为了消除翘曲和开裂最根本的是加热速率要缓慢。截面越厚，加热的时间就要越长才能达到均匀的结果。 Even after the correct temperature has been reached, the piece should be held at that temperature for a sufficient period of time to permit its thickest section to attain a uniform temperature.即使加热到正确的温度后，工件也应在此温度下保持足够时间以让其最厚截面达到相同温度。 The hardness obtained from a given treatment depends on the quenching rate, the carbon content, and the work size.In alloy steels the kind and amount of alloying element influences only the hardenability(the ability of the workpiece to be hardened to depths)of the steel and does not affect the hardness except in unhardened or partially hardened steels.通过给定的热处理所得到的硬度取决于淬火速率、含碳量和工件尺寸。除了非淬硬钢或部分淬硬钢外，合金钢中合金元素的种类及含量仅影响钢的淬透性(工件被硬化到深层的能力)而不影响硬度。 Steel with low carbon content will not respond appreciably to hardening treatment.As the carbon content in steel increases up to around 0.60%, the possible hardness obtainable also increases.含碳量低的钢对淬火处理没有明显的反应。随着钢的含碳量增加到大约0.60%，可能得到的硬度也增加。 Above this point the hardness can be increased only slightly, because steels above the eutectoid point are made up entirely of pearlite and cementite in the annealed state.Pearlite responds best to heat-treating operations;and steel composed mostly of pearlite can be transformed into a hard steel.高于此点，由于超过共析点钢完全由珠光体和退火状态的渗碳体组成，硬度增加并不多。珠光体对热处理作业响应最好；基本由珠光体组成的钢能转化成硬质钢。 As the size of parts to be hardened increases, the surface hardness decreases somewhat even though all other conditions have remained the same.There is a limit to the rate of heat flow through steel.即使所有其它条件保持不变，随着要淬火的零件尺寸的增加其表面硬度也会有所下降。热量在钢中的传导速率是有限的。 No matter how cool the quenching medium may be, if the heat inside a large piece cannot escape faster than a certain critical rate, there is a definite limit to the inside hardness.However, brine or water quenching is capable of rapidly bringing the surface of the quenched part to its own temperature and maintaining it at or close to this temperature.无论淬火介质怎么冷，如果在大工件中的热量不能比特定的临界速率更快散发，那它内部硬度就会受到明确限制。然而盐水或水淬火能够将被淬零件的表面迅速冷却至本身温度并将其保持或接近此温度。 Under these circumstances there would always be some finite depth of surface hardening regardless of size.This is not true in oil quenching, when the surface temperature may be high during the critical stages of quenching.在这种情况下不管零件尺寸如何，其表面总归有一定深度被硬化。但油淬情况就不是如此，因为油淬时在淬火临界阶段零件表面的温度可能仍然很高。 Tempering 回火 Steel that has been hardened by rapid quenching is brittle and not suitable for most uses.By tempering or drawing, the hardness and brittleness may be reduced to the desired point for service conditions． 快速淬火硬化的钢是硬而易碎的，不适合大多数场合使用。通过回火，硬度和脆性可以降低到使用条件所需要的程度。 As these properties are reduced there is also a decrease in tensile strength and an increase in the ductility and toughness of the steel.The operation consists of reheating quench-hardened steel to some temperature below the critical range followed by any rate of cooling.随着这些性能的降低，拉伸强度也降低而钢的延展性和韧性则会提高。回火作业包括将淬硬钢重新加热到低于临界范围的某一温度然后以任意速率冷却。 Although this process softens steel, it differs considerably from annealing in that the process lends itself to close control of the physical properties and in most cases does not soften the steel to the extent that annealing would.The final structure obtained from tempering a fully hardened steel is called tempered martensite.虽然这过程使钢软化，但它与退火是大不相同的，因为回火适合于严格控制物理性能并在大多数情况下不会把钢软化到退火那种程度。回火完全淬硬钢得到的最终组织结构被称为回火马氏体。 Tempering is possible because of the instability of the martensite, the principal constituent of hardened steel.Low-temperature draws, from 300℉ to 400℉(150℃~205℃), do not cause much decrease in hardness and are used principally to relieve internal strains.由于马氏体这一淬硬钢主要成分的不稳定性，使得回火成为可能。低温回火，300℉到400℉(150℃~205℃)，不会引起硬度下降很多，主要用于减少内部应变。 As the tempering temperatures are increased, the breakdown of the martensite takes place at a faster rate, and at about 600℉(315℃)the change to a structure called tempered martensite is very rapid.The tempering operation may be described as one of precipitation and agglomeration or coalescence of cementite.随着回火温度的提高，马氏体以较快的速率分解，并在大约600℉(315℃)迅速转变为被称为回火马氏体的结构。回火作业可以描述为渗碳体析出和凝聚或聚结的过程。 A substantial precipitation of cementite begins at 600℉(315℃), which produces a decrease in hardness.Increasing the temperature causes coalescence of the carbides with continued decrease in hardness.渗碳体的大量析出开始于600℉(315℃)，这使硬度下降。温度的上升会使碳化物聚结而硬度继续降低。 In the process of tempering, some consideration should be given to time as well as to temperature.Although most of the softening action occurs in the first few minutes after the temperature is reached, there is some additional reduction in hardness if the temperature is maintained for a prolonged time.在回火过程中，不但要考虑温度而且要考虑时间。虽然大多数软化作用发生在达到所需温度后的最初几分钟，但如果此温度维持一段延长时间，仍会有些额外的硬度下降。 Usual practice is to heat the steel to the desired temperature and hold it there only long enough to have it uniformly heated.通常的做法是将钢加热到所需温度并且仅保温到正好使其均匀受热。 Two special processes using interrupted quenching are a form of tempering.In both, the hardened steel is quenched in a salt bath held at a selected lower temperature before being allowed to cool.These processes, known as austempering and martempering, result in products having certain desirable physical properties.两种采用中断淬火的特殊工艺也是回火的形式。这两种工艺中，淬硬钢在其被允许冷却前先在一选定的较低温度盐浴淬火。这两种分别被称为奥氏体回火和马氏体回火的工艺，能使产品具有特定所需的物理性能。 Annealing 退火 The primary purpose of annealing is to soften hard steel so that it may be machined or cold worked.退火的主要目的是使坚硬的钢软化以便机加工或冷作。 This is usually accomplished by heating the steel too slightly above the critical temperature, holding it there until the temperature of the piece is uniform throughout, and then cooling at a slowly controlled rate so that the temperature of the surface and that of the center of the piece are approximately the same.通常是非常缓慢地将钢加热到临界温度以上，并将其在此温度下保持到工件全部均匀受热，然后以受控的速率慢慢地冷却，这样使得工件表面和内部的温度近似相同。 This process is known as full annealing because it wipes out all trace of previous structure, refines the crystalline structure, and softens the metal.Annealing also relieves internal stresses previously set up in the metal.这过程被称为完全退火，因为它去除了以前组织结构的所有痕迹、细化晶粒并 软化金属。退火也释放了先前在金属中的内应力。 The temperature to which a given steel should be heated in annealing depends on its composition;for carbon steels it can be obtained readily from the partial iron-iron carbide equilibrium diagram.When the annealing temperature has been reached, the steel should be held there until it is uniform throughout.给定的钢其退火温度取决于它的成分；对碳钢而言可容易地从局部的铁碳合金平衡图得到。达到退火温度后，钢应当保持在此温度等到全部均匀受热。 This usually takes about 45min for each inch(25mm)of thickness of the largest section.For maximum softness and ductility the cooling rate should be very slow, such as allowing the parts to cool down with the furnace.The higher the carbon content, the slower this rate must be.加热时间一般以工件的最大截面厚度计每英寸(25mm)大约需45min。为了得到最大柔软性和延展性冷却速率应该很慢，比如让零件与炉子一起冷下来。含碳量越高，冷却的速率必须越慢。 The heating rate should be consistent with the size and uniformity of sections, so that the entire part is brought up to temperature as uniformly as possible.加热的速率也应与截面的尺寸及均匀程度相协调，这样才能使整个零件尽可能均匀地加热。 Normalizing and Spheroidizing 正火和球化 The process of normalizing consists of heating the steel about 50℉ to 100℉(10℃~40℃)above the upper critical range and cooling in still air to room temperature.正火处理包括先将钢加热到高于上临界区50℉到100℉(10℃~40℃)然后在静止的空气中冷却到室温。 This process is principally used with low-and medium-carbon steels as well as alloy steels to make the grain structure more uniform, to relieve internal stresses, or to achieve desired results in physical properties.Most commercial steels are normalized after being rolled or cast.退火主要用于低碳钢、中碳钢及合金钢，使晶粒结构更均匀、释放内应力或获得所需的物理特性。大多数商业钢材在轧制或铸造后都要退火。 Spheroidizing is the process of producing a structure in which the cementite is in a spheroidal distribution.If steel is heated slowly to a temperature just below the critical range and held there for a prolonged period of time, this structure will be obtained.球化是使渗碳体产生成类似球状分布结构的工艺。如果把钢缓慢加热到恰好低于临界温度并且保持较长一段时间，就能得到这种组织结构。 The globular structure obtained gives improved machinability to the steel.This treatment is particularly useful for hypereutectoid steels that must be machined.所获得的球状结构改善了钢的可切削性。此处理方法对必须机加工的过共析钢特别有用。 Surface Hardening 表面硬化 Carburizing The oldest known method of producing a hard surface on steel is case hardening or carburizing.Iron at temperatures close to and above its critical temperature has an affinity for carbon.渗碳 最早的硬化钢表面的方法是表面淬火或渗碳。铁在靠近并高于其临界温度时对碳具有亲合力。 The carbon is absorbed into the metal to form a solid solution with iron and converts the outer surface into high-carbon steel.The carbon is gradually diffused to the interior of the part.The depth of the case depends on the time and temperature of the treatment.碳被吸收进金属与铁形成固溶体使外表面转变成高碳钢。碳逐渐扩散到零件内 部。渗碳层的深度取决于热处理的时间和温度。 Pack carburizing consists of placing the parts to be treated in a closed container with some carbonaceous material such as charcoal or coke.It is a long process and used to produce fairly thick cases of from 0.03 to 0.16 in.(0.76~4.06mm)in depth.固体渗碳的方法是将要处理的零件与木炭或焦炭这些含碳的材料一起放入密闭容器。这是一个较长的过程，用于产生深度为0.03到0.16 英寸(0.76~4.06mm)这么厚的硬化层。 Steel for carburizing is usually a low-carbon steel of about 0.15% carbon that would not in itself responds appreciably to heat treatment.In the course of the process the outer layer is converted into high-carbon steel with a content ranging from 0.9% to 1.2% carbon.用于渗碳的一般是含碳量约为0.15%、本身不太适合热处理的低碳钢。在处理过程中外层转化为含碳量从0.9%到1.2%的高碳钢。 A steel with varying carbon content and, consequently, different critical temperatures requires a special heat treatment.含碳量变化的钢具有不同的临界温度，因此需要特殊的热处理。 Because there is some grain growth in the steel during the prolonged carburizing treatment, the work should be heated to the critical temperature of the core and then cooled, thus refining the core structure.The steel should then be reheated to a point above the transformation range of the case and quenched to produce a hard, fine structure.由于在较长的渗碳过程中钢内部会有些晶粒生长，所以工件应该加热到核心部分的临界温度再冷却以细化核心部分的组织结构。然后重新加热到高于外层转变温度再淬火以生成坚硬、细致的组织结构。 The lower heat-treating temperature of the case results from the fact that hypereutectoid steels are normally austenitized for hardening just above the lower critical point.A third tempering treatment may be used to reduce strains.由于恰好高于低临界温度通常使过共析钢奥氏体化而硬化，所以对外层采用较低的热处理温度。第三次回火处理可用于减少应变。 Carbonitriding Carbonitriding, sometimes known as dry cyaniding or nicarbing, is a case-hardening process in which the steel is held at a temperature above the critical range in a gaseous atmosphere from which it absorbs carbon and nitrogen.碳氮共渗 碳氮共渗，有时也称为干法氰化或渗碳氮化，是一种表面硬化工艺。通过把钢放在高于临界温度的气体中，让它吸收碳和氮。 Any carbon-rich gas with ammonia can be used.The wear-resistant case produced ranges from 0.003 to 0.030 inch(0.08~ 0.76mm)in thickness.An advantage of carbonitriding is that the hardenability of the case is significantly increased when nitrogen is added, permitting the use of low-cost steels.可以使用任何富碳气体加氨气，能生成厚度从0.003到0.030英寸(0.08~ 0.76mm)的耐磨外层。碳氮共渗的优点之一是加入氮后外层的淬透性极大增加，为使用低价钢提供条件。 Cyaniding Cyaniding, or liquid carbonitriding as it is sometimes called, is also a process that combines the absorption of carbon and nitrogen to obtain surface hardness in low-carbon steels that do not respond to ordinary heat treatment.氰化 氰化，有时称为液体碳氮共渗，也是一种结合了吸收碳和氮来获得表面硬度的工艺，它主要用于不适合通常热处理的低碳钢。 The part to be case hardened is immersed in a bath of fused sodium cyanide salts at a temperature slightly above the Ac1 range, the duration of soaking depending on the depth of the case.The part is then quenched in water or oil to obtain a hard surface.35 需表面硬化的零件浸没在略高于Ac1温度熔化的氰化钠盐溶液中，浸泡的持续时间取决于硬化层的深度。然后将零件在水或油中淬火。 Case depths of 0.005 to 0.015in.(0.13~0.38mm)may be readily obtained by this process.Cyaniding is used principally for the treatment of small parts.通过这样处理可以容易地获得0.005到0.015英寸(0.13~0.38mm)的硬化深度。氰化主要用于处理小零件。 Nitriding Nitriding is somewhat similar to ordinary case hardening, but it uses a different material and treatment to create the hard surface constituents.渗氮 渗氮有些类似普通表面硬化，但它采用不同的材料和处理方法来产生坚硬表面成分。 In this process the metal is heated to a temperature of around 950℉(510℃)and held there for a period of time in contact with ammonia gas.Nitrogen from the gas is introduced into the steel, forming very hard nitrides that are finely dispersed through the surface metal.这种工艺中金属加热到约950℉(510℃)，然后与氨气接触一段时间。氨气中的氮进入钢内，形成细微分布于金属表面又十分坚固的氮化物。 Nitrogen has greater hardening ability with certain elements than with others, hence, special nitriding alloy steels have been developed.氮与某些元素的硬化能力比其它元素大，因此开发了专用的渗氮合金钢。Aluminum in the range of 1% to 1.5% has proved to be especially suitable in steel, in that it combines with the gas to form a very stable and hard constituent.The temperature of heating ranges from 925℉ to 1,050℉(495℃~565℃).在钢中含铝1%到1.5%被证明特别合适，它能与氨气结合形成很稳定坚固的成分。其加热温度范围为925℉到1,050℉(495℃~565℃)。 Liquid nitriding utilizes molten cyanide salts and, as in gas nitriding, the temperature is held below the transformation range.Liquid nitriding adds more nitrogen and less carbon than either cyaniding or carburizing in cyanide baths.液体渗氮利用熔化的氰化物盐，就像气体渗氮，温度保持在低于转化范围内。液体渗氮时在氰化物溶液中加入比氰化及渗碳都较多的氮和较少的碳。 Case thickness of 0.001 to 0.012in.(0.03~0.30mm)is obtained, whereas for gas nitriding the case may be as thick as 0.025 in.(0.64mm).In general the uses of the two-nitriding processes are similar.液体渗氮可以获得厚度为0.001到0.012英寸(0.03~0.30mm)的硬化层，然而气体渗氮则能获得厚0.025英寸(0.64mm)的硬化层。一般而言两种渗氮方法的用途是类 似的。 Nitriding develops extreme hardness in the surface of steel.This hardness ranges from 900 to 1,100 Brinell, which is considerably higher than that obtained by ordinary case hardening.渗氮在钢表面获得远远超出正常标准的硬度。其硬度范围为900到1,100布氏硬度，这远高于普通表面硬化所获得的硬度。 Nitriding steels, by virtue of their alloying content, are stronger than ordinary steels and respond readily to heat treatment.It is recommended that these steels be machined and heat-treated before nitriding, because there is no scale or further work necessary after this process.由于渗氮钢的合金比例，它们比普通钢更强，也容易热处理。建议对这种钢在渗氮前先机加工和热处理，因为渗氮后没有剥落并不需要更多的加工。 Fortunately, the interior structure and properties are not affected appreciably by the nitriding treatment and, because no quenching is necessary, there is little tendency to warp, develop cracks, or change condition in any way.The surface effectively resists corrosive action of water, saltwater spray, alkalies, crude oil, and natural gas.值得庆幸的是由于渗氮处理一点都不影响内部结构和性能，也无需淬火，所以几乎没有任何产生翘曲、裂缝及变化条件的趋势。这种表面能有效地抵御水、盐雾、碱、原油和天然气的腐蚀反应。 Casting is a manufacturing process in which molten metal is poured or injected and allowed to solidify in a suitably shaped mold cavity.During or after cooling, the cast part is removed from the mold and then processed for delivery.铸造是一种将熔化的金属倒入或注入合适的铸模腔并且在其中固化的制造工艺。在冷却期间或冷却后，把铸件从铸模中取出，然后进行交付。 Casting processes and cast-material technologies vary from simple to highly complex.Material and process selection depends on the part’s complexity and function, the product’s quality specifications, and the projected cost level.铸造工艺和铸造材料技术从简单到高度复杂变化很大。材料和工艺的选择取决于零件的复杂性和功能、产品的质量要求以及成本预算水平。 Castings are parts that are made close to their final dimensions by a casting process.With a history dating back 6,000 years, the various casting processes are in a state of continuous refinement and evolution as technological advances are being made.通过铸造加工，铸件可以做成很接近它们的最终尺寸。回溯6,000年历史，各种各样的铸造工艺就如同科技进步一样处于一个不断改进和发展的状态。 Sand Casting 砂型铸造 Sand casting is used to make large parts(typically iron, but also bronze，39 brass, aluminum).Molten metal is poured into a mold cavity formed out of sand(natural or synthetic).砂型铸造用于制造大型零件(具有代表性是铁，除此之外还有青铜、黄铜和铝)。将熔化的金属倒入由型砂(天然的或人造的)做成铸模腔。 The processes of sand casting are discussed in this section, including patterns, sprues and runners, design considerations, and casting allowance.本节讨论砂型铸造工艺，包括型模、浇注口、浇道、设计考虑因素及铸造余量。The cavity in the sand is formed by using a pattern(an approximate duplicate of the real part), which are typically made out of wood, sometimes metal.The cavity is contained in an aggregate housed in a box called the flask.砂型里的型腔是采用型模(真实零件的近似复制品)构成的，型模一般为木制，有时也用金属制造。型腔整个包含在一个被放入称为砂箱的箱子里的组合体内。 Core is a sand shape inserted into the mold to produce the internal features of the part such as holes or internal passages.Cores are placed in the cavity to form holes of the desired shapes.Core print is the region added to the pattern, core, or mold that is used to locate and support the core within the mold.砂芯是插入铸模的砂型，用于生成诸如孔或内通道之类的内部特征。砂芯安放在型腔里形成所需形状的孔洞。砂芯座是加在型模、砂芯或铸模上的特定区域，用 来在铸模内部定位和支撑砂芯。 A riser is an extra void created in the mold to contain excessive molten material.The purpose of this is to feed the molten metal to the mold cavity as the molten metal solidifies and shrinks, and thereby prevents voids in the main casting.冒口是在铸模内部增加的额外空间，用于容纳过多的熔化金属。其目的是当熔化金属凝固和收缩时往型腔里补充熔化金属，从而防止在主铸件中产生孔隙。 In a two-part mold, which is typical of sand castings, the upper half, including the top half of the pattern, flask, and core is called cope and the lower half is called drag, as shown in Fig.3.1.The parting line or the parting surface is line or surface that separates the cope and drag.在典型砂型铸造的两箱铸模中，上半部分(包括型模顶半部、砂箱和砂芯)称为上型箱，下半部分称为下型箱，见图3.1所示。分型线或分型面是分离上下型箱的线或面。 The drag is first filled partially with sand, and the core print, the cores, and the gating system are placed near the parting line.The cope is then assembled to the drag, and the sand is poured on the cope half, covering the pattern, core and the gating system.首先往下型箱里部分地填入型砂和砂芯座、砂芯，并在靠近分型线处放置浇注系统。然后将上型箱与下型箱装配在一起，再把型砂倒入上型箱盖住型模、砂芯和 浇注系统。 The sand is compacted by vibration and mechanical means.Next, the cope is removed from the drag, and the pattern is carefully removed.The object is to remove the pattern without breaking the mold cavity.型砂通过振动和机械方法压实。然后从下型箱上撤掉上型箱，小心翼翼地取出型模。其目的是取出型模而不破坏型腔。 This is facilitated by designing a draft, a slight angular offset from the vertical to the vertical surfaces of the pattern.This is usually a minimum of 1.5mm(0.060in.), whichever is greater.The rougher the surface of the pattern, the more the draft to be provided.通过设计拔模斜度—型模垂直相交表面的微小角度偏移量—来使取出型模变得容易。拔模斜度最小一般为1.5mm(0.060in.)，只能比此大。型模表面越粗糙，则拔模斜度应越大。 The molten material is poured into the pouring cup, which is part of the gating system that supplies the molten material to the mold cavity.熔化的金属从浇注杯注入型腔，浇注杯是浇注系统向型腔提供熔化金属的部分。The vertical part of the gating system connected to the pouring cup is the sprue, and the horizontal portion is called the runners and finally to the multiple points where it is introduced to the mold cavity called the gates.42 将浇注系统的垂直部分与浇注杯连接的是浇注口，浇注系统的水平部分称为浇道，最后到多点把熔化金属导入型腔的称为闸道。 Additionally there are extensions to the gating system called vents that provide the path for the built-up gases and the displaced air to vent to the atmosphere.除此之外，还有称为排放口的浇注系统延长段，它为合成气体和置换空气排放到大气提供通道。 The cavity is usually made oversize to allow for the metal contraction as it cools down to room temperature.This is achieved by making the pattern oversize.To account for shrinking, the pattern must be made oversize by these factors on the average.These are linear factors and apply in each direction.型腔通常大于所需尺寸以允许在金属冷却到室温时收缩。这通过把型模做得大于所需尺寸来达到。为解决收缩效应，一般而言型模做得比所需尺寸大，必须考虑线性因素并作用于各个方向。 These shrinkage allowances are only approximate, because the exact allowance is determined by the shape and size of the casting.In addition, different parts of the casting might require different shrinkage allowances.收缩余量仅仅是近似的，因为准确的余量是由铸件的形状和尺寸决定的。另外，铸件的不同部分也可能需要不同的收缩余量。 Sand castings generally have a rough surface sometimes with surface impurities, and surface variations.A machining(finish)allowance is made for this type of defect.砂型铸件一般表面粗糙，有时还带有表面杂质和表面变异。对这类缺陷采用机加工(最后一道工序)的余量。 In general, typical stages of sand casting operation include(as shown in Fig.3.2): 1.Patterns are made.These will be the shape used to form the cavity in the sand.一般而言，砂型铸造作业的典型阶段包括(如图3.2所示)： 1.制作型模。做成用于在型砂中形成型腔的形状。 2.Cores may also be made at this time.These cores are made of bonded sand that will be broken out of the cast part after it is complete.3.Sand is mulled(mixed)thoroughly with additives such as bentonite to increase bonding and overall strength.2.同时还要制作砂芯。这些砂芯用粘结砂做成，等铸件完成后将被打碎取出。3.型砂与膨润土之类的添加剂充分地混合以增强连接及整体强度。 4.Sand is formed about the patterns, and gates, runners, risers, vents and pouring cups are added as needed.A compaction stage is typically used to ensure good coverage and solid molds.4.型砂在型模周围成形，并根据需要安放闸道、浇道、冒口、排放口和浇注杯等。通常要采取压紧步骤来保证良好的覆盖和坚固的铸型。 Cores may also be added to make concave or internal features for the cast part.Alignment pins may also be used for mating the molds later.Chills may be added to cool large masses faster.安放砂芯来制成铸件的凹形结构或内部特征。为了以后铸模匹配还要用到定位销。对大质量铸件可能需要加入冷却物来使其较快冷却。 5.The patterns are removed, and the molds may be put through a baking stage to increase strength.6.Mold halves are mated and prepared for pouring metal.5.取走型模，将铸模烘焙以增加强度。6.匹配上下铸模，做好浇铸金属的准备。 7.Metal is preheated in a furnace or crucible until is above the liquidus temperature in a suitable range(we don’t want the metal solidifying before the pour is complete).The exact temperature may be closely controlled depending upon the application.7.金属在熔炉或坩埚中预热到高于液化温度的一个合适范围内(不希望金属在 浇铸完成前凝固)。确切的温度要根据应用场合严格控制。 Degassing, and other treatment processes may be done at this time, such as removal of impurities(i.e.slag).Some portion of this metal may be remelted scrap from previously cast parts—10% is reasonable.在此期间还要进行排气和其它处理步骤，例如去除杂质(即熔渣)。可以加入一定量原先是这种金属铸件的废料再融化—10%是适当的。 8.The metal is poured slowly, but continuously into the mold until the mold is full.9.As the molten metal cools(minutes to days), the metal will shrink and the volume will decrease.During this time molten metal may backflow from the molten risers to feed the part and maintain the same shape.8.将金属缓慢而连续地注满型模。 9.随着熔化金属的冷却(几分钟到几天)，金属收缩体积减小。在此期间熔化金属可能从冒口回流供给零件以保持其形状不变。 10.Once the part starts to solidify small dendrites of solid material form in the part.During this time metal properties are being determined, and internal stresses are being generated.If a part is allowed to cool slowly enough at a constant rate then the final part will be relatively homogenous and stress free.46 10.在零件开始凝固其内部形成固态金属的小型树枝状结晶期间金属性能被确定，同时也产生了内应力。如果零件以恒定速率冷却得足够缓慢，最终零件将相对均质并释放内应力。 11.Once the part has completely solidified below the eutectic point it may be removed with no concern for final metal properties.At this point the sand is simply broken up, and the part removed.At this point the surface will have a quantity of sand adhering to the surface, and solid cores inside.11.一旦零件在共析点以下完全凝固，可以不考虑金属的最后性能而将其取出。这时可以简单地打碎砂型并取出零件，但零件表面会有大量型砂粘附着，内部还有实心的砂芯。 12.A bulk of the remaining sand and cores can be removed by mechanically striking the part.Other options are to use a vibrating table, sand/shot blaster, hand labor, etc.12.大量的剩余型砂和砂芯要通过机械敲击零件来去除。其它的选择还有采用振动台、喷砂/喷丸机、手工作业等等。 13.The final part is cut off the runner gate system, and is near final shape using cutters, torches, etc.Grinding operations are used to remove any remaining bulk.14.The part is taken down to final shape using machining operations.And cleaning operations may be used to remove oxides, etc.47 13.最后零件要用刀具、喷枪等切掉浇道闸道系统，这样就接近最终形状了。再用磨削作业去除多余的部分。 14.通过机加工将零件切削到最终形状。可能还要用清洗作业去除氧化物等。Investment casting 熔模铸造 Investment casting is also known as the lost wax process.This process is one of the oldest manufacturing processes.The Egyptians used it in the time of the Pharaohs to make gold jewelry(hence the name Investment)some 5,000 years ago.熔模铸造也称为失蜡加工。这是最古老的制造工艺之一。大约在5,000年前的法老王时代，埃及人就用它制造黄金饰品(因此而得名投资)。 Intricate shapes can be made with high accuracy.In addition, metals that are hard to machine or fabricate are good candidates for this process.It can be used to make parts that cannot be produced by normal manufacturing techniques, such as turbine blades that have complex shapes, or airplane parts that have to withstand high temperatures.复杂的形状能被高精度地制造。另外较难机加工或制作的金属都能用此工艺。它还能用于生产一般制造技术无法生产的零件，例如有复杂形状的涡轮叶片或必须耐得住高温的飞机零件。 The mold is made by making a pattern using wax or some other material that can be melted away.This wax pattern is dipped in refractory slurry, which coats the wax pattern and forms a skin.This is dried and the process of dipping in the slurry and drying is repeated until a robust thickness is achieved.制作铸型的型模采用石蜡或其它一些能被融化掉的材料做成。石蜡型模浸泡在耐热浆里，让它覆盖型模并形成外壳，然后使其变干。重复这个浸泡、变干的过程直至获得足够的厚度。 After this, the entire pattern is placed in an oven and the wax is melted away.This leads to a mold that can be filled with the molten metal.Because the mold is formed around a one-piece pattern(which does not have to be pulled out from the mold as in a traditional sand casting process), very intricate parts and undercuts can be made.完成后把整个型模放在烤箱里融化石蜡。这样就做成了能填充熔化金属的铸型。由于这种铸型是环绕整块型模形成的(无需像传统的砂型铸造工艺那样拔模)，能制作十分复杂的零件和浮雕。 The wax pattern itself is made by duplicating using a stereo lithography or similar model—which has been fabricated using a computer solid model master.石蜡型模本身能用立体制版或类似的模型复制—这可以采用计算机立体模型原 版制作。 The materials used for the slurry are a mixture of plaster, a binder and powdered silica, a refractory, for low temperature melts.For higher temperature melts, sillimanite or alumina-silicate is used as a refractory, and silica is used as a binder.对较低熔化温度而言，用于耐热浆的材料是石膏作粘合剂和用粉末状硅石作耐温材料的混合物。对较高熔化温度而言，则采用硅线石或氧化铝硅酸盐作耐温材料、无水硅酸作粘合剂。 Depending on the fineness of the finish desired additional coatings of sillimanite and ethyl silicate may be applied.The mold thus produced can be used directly for light castings, or be reinforced by placing it in a larger container and reinforcing it more slurry.根据最后所需光洁度也可采用硅线石和乙烷基硅酸盐。这样生成的铸模可直接用于薄壁铸件或通过将其放在较大容器内用更多耐热浆加强。 Just before the pour, the mold is pre-heated to about 1,000℃(1,832℉)to remove any residues of wax, harden the binder.The pour in the pre-heated mold also ensures that the mold will fill completely.在正要浇铸之前，将型模预热到约1,000℃(1,832℉)以去除剩余石蜡、硬化粘合剂。在预热的型模中浇铸也能保证型模完全充满。 Pouring can be done using gravity, pressure or vacuum conditions.50 《美国口语惯用法例句集粹》Ａ A(Page 1-4) 1.about 1) 2) 3) 4) 5) 6) 7)I'd like to know what this is all about.我想知道这到底是怎么回事。How about a fish sandwich? 来一块鱼肉三明治怎么样？What about me? 我怎么样？I'm not about to go in that old house.我是不会进那幢旧房子的！Yes I remember that night.What about it? 是的，我记得那个晚上，那又怎样？What's this all about? 这到底是怎么回事？It's about time you showed up!差不多是你该露面的时候了。 2.above 1) 2)Above all, I want everything quiet.首要的是：我要一切保持安定。Tom thinks he's above hard work.汤姆认为自己没必要努力工作。 3.act 1) 2) 3) 4) 5) 6)Would you please act out what happened? 你能把发生的事演示一下吗？Watch Ricky.He sometimes likes to act up in class.注意里基，他又是喜欢在课堂上捣蛋。That profane comedian needs to clean up his act.那个爱说粗言秽语的喜剧演员应该净化一下自己的言行。We need to get our act together and come to see you.我们需要统一意见后来见你。The newspapers called the earthquake an act of God.报纸上称那次地震为天灾。Masa is a class act.玛莎是位杰出的女性。 4.action 1) 2) 3) 4)We're going to bring action against our debtors.我们打算控告我们的债务人。Did you see any action in yesterday's ballgame? 昨晚的棒球比赛中你看到有什么有趣的精彩场面吗？Our community is going to take action against the proposed waste dump.我地区要采取行动反对那项垃圾处理场的提案。Jim wants to go where the action is.吉姆想去有刺激性的地方。 5.advantage 1) 2)Our opponents have a height advantage on us.我们的对手在身高上比我们占有优势。Nobody likes to be taken advantage of.没有人喜欢被捉弄（或：被欺骗、利用） 6.after 1) 2) 3) 4)I think that girl is after you.我想那女孩是在追你。It looks like things are gonna work out after all.看起来事情终会解决的。This soft drink has a nasty aftertaste.这软饮料有种让人难受的余味。I see your point, but don't you think it's way after the fact.我明白你的意思，但你不觉 得这已是“事后诸葛亮”了吗？ 7.again 1)I could go to Japan again and again.我可以一而再、再而三地去日本。（注：意指不会感到 厌倦） 8.age 1) 2)Would you please act your age!请你做事要有一个与自己年龄相称的样子。This is a “coming of age” movie.这是一部成人影片。 9.air 1) 2) 3) 4) 5) 6) 7) 8) 9)I need to go outside and get some air.我需要出去呼吸点新鲜空气。I don't know what's wrong, but can feel it in the air.虽然我不知道到底是出了什么差错，但我能隐隐约约感觉到。Mike was sad when they took his favorite program off the air.当迈克喜欢的节目被取消时，他感到很伤心。The sale of our house is still up in the air.我们的房子出勤率售一事还没有最后定下来。After winning the championship, I felt I could walk on air.获得冠军后，我飘飘欲仙。Your sister is such an airhead.你姐姐真是来个没有头脑的人。Janet Jackson's new song is getting lots of airplay.珍妮〃杰克逊的新歌到处都在不断地播放。That last time I took a plane, I got airsick.上次我乘飞机时晕机了。I hope there's no bad air between us.我希望我们之间的关系不要很别扭。 10.all 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13)It's looks like we won't be going after all.看起来最后我们还是不能去。We've all but finished the project.我们已几乎完成了那个项目。All in all I'd say it's been a very productive day.总的来说，我认为这一天过得很充实。Let's go all-out and win this game!让我们尽全力来打赢这场比赛。We knew it was all over when we saw the building burst.当我们看见那座建筑突然起火时，我们知道一切全完了。We wish you all the best.我们大家祝福你一切如意。If it's all the same to you, I'd just as soon not go.如果这对你都是一回事的话，我就不想去了。They were running from the police like all get-out.他们以极快的速度逃脱警察的追赶。I didn't see them come in at all.我根本高没有发现他们的进来。Let's settle this matter once and for all.让我们来把这个问题一次性地彻底解决掉。Mark is an all-around athlete.马克是一个全能运动员。Did you get to play in the all-star game? 你入选全明星队的比赛了吗？He bloke the all-time record in the 100-meter run at his school.他打破了他所在的学校 100米跑的历史最高记录。 11.alley 1)Working on cars isn't up my alley.修理汽车不是我拿手的活儿。 12.alone 1) 2)I just wanna be left alone.我只是想一个人呆会儿。Can't you just leave well enough alone? 你不能少管一些闲事吗？ 13.along 1) 2)You knew all along what was going on.你从一开始就知道所发生的事。Debbie doesn't get along with Steve.戴比和史蒂夫相处得不好。 1) 2) 3) 4) 5)Mr.Pak came here searching for the American dream.帕克先生来到这儿寻求他的“美国梦”。Some foreigners become Americanized while living in the U.S.一些外国人在美国居住时被美国化了。Not having any job freedom would be totally unAmerican.没有选择职业的自由是完全违背美国精神传统的。Bill is an all-American quarterback.比尔是全美（橄榄球）明星赛的四分卫队员。I just can't go on the American way.我无法适应美国方式。 15.animal 1) 2)Water-skiing really brings out the animal in Tom.滑水运动真正激发出了汤姆的活力与激情。The young actor emits a lot of animal magnetism on the screen.那个年轻演员在荧幕 上充分显示出他的性魅力。 16.answer 1)I called Emi but there was no answer.我给埃米打了电话，但是没人接。 17.apple 1) 2) 3) 4) 5)Have you ever been to the Big Apple? 你去过纽约吗？Do I sense an apple of discord between you two? 你问我有没有感觉出你们两人之间的不和，是吗？Heather is the apple of my eye.希瑟是我的掌上明珠。Rita likes to keep everything in apple-pie order.丽塔喜欢把一切都弄得井井有条。Dennis has always been an apple polisher.丹尼斯一直就是一个马屁精。 18.arm 1) 2) 3) 4)You don't have to twist my arm to get me to go with you.用不着你强迫我跟你走。My father is a hopeless armchair quarterback.我爸爸是一个没救了的纸上谈兵的人。The suspects are armed and dangerous.嫌疑犯带有武器，十分危险。Every spring the park is filled with lovers walking arm in arm.每到春天公园里到处都是 手挽手散步的恋人。 19.around 1) 2)Coach Johnson has been around for 30 years.约翰逊教练已有三十年的经验了。Someone is on duty here around-the-clock.有人在这里昼夜值班。 20.as 1) 2) 3) 4) 5) 6)It looks as if someone has already been here.看起来在人来过这里了。As for me, I'm going home.至于我，我准备回家。Marty is acting as if nothing happened.马蒂表现得像什么也没发生过一样。I want this room left as is.我希望这间房子保持原样。The changes will begin taking place as of tomorrow.变动从明天开始实施。Police are baffled as to the whereabouts of the kidnappers.警察局搜寻绑架者的工作受 挫。 1) 2) 3) 4)Our gas bill average about $50 a month.我们每个月的煤气费平均50美元。On the average, I'd say we eat chicken once a week.我们平均每周吃一次鸡肉。Kent describes himself as just an average Joe.肯特视自己为一名普通的美国人。On the average day, over 100,000 kids bring guns to school in the U.S.在美国平常日 子里，有100,000个孩子带手枪去上学。 22.away 1) 2) 3) 4) 5)What makes you think you're gonna get away with this? 是什么使你认为你可以免受处罚？I wish they'd do away with these complicated tax forms.我希望他们能费除掉这些复杂的税务表格。We're planning a weekend getaway for our anniversary.我们正在为庆祝我们的纪念日而安排一次周末的外出活动。Tom wants to run away from home.汤姆想从家里出逃。Dave and Kathy are going to steal away on vacation.戴夫和凯茜计划在假期里偷偷跑出 去。第四篇：机械专业英语文章 中英文对照
第五篇：中英文对照A
点击咨询 