第一篇：制 程 稽 核 准 则(中英文对照版)
PROCESS AUDIT GUIDELINES
制 程 稽 核 准 则
SUGGESTED CONTENT包含的内容 WORK INSTRUCTIONS作业指导书
Available at each process step
每个步骤是否被执行
Work Instruction under revision control and at current revision level
作业指导书是否有版本管制及当前版本。
Calls out current production part number and revision level
有没有注明产品编号及版本。
Calls out direct materials P/N, description, usage, and designator
有无直接罗列所用材料料号，规格，用量，点位。
Calls out operation machine name & station number, machine program name & revision, fixtures name/part number & revision
有无机器名称/编号，机器程序名/版本，治具名/编号/版本。
Call out tools/gages with part number or name, indirect materials with detailed description, and their working conditions
有无罗列所用工具及计量器名称或编号，以及用到的间接材料（如胶，锡丝）有无具体说明，包括他们工作条件。
Calls out work process/instruction for the station
每一站有无罗列作业步骤及作业指导。
Call out highlights/special notes for the operation
在作业指导书中有没有对相关注意事项做重点标识。
OPERATOR作业员
Is operator certified for operation 作业员是否有受过相关作业资格培训 If operator is in training, verify adequate supervision 在训新员工上线是否有人做足够的监督检查 Ongoing program for re-certification of operators 对作业员是否有再认证计划.Is operation staffed per Work Instructions 作业指导书是否规定各操作负责人员.Is operation being performed per Work Instructions 作业指导书上规定的操作是否都被执行.Is the operator monitored for his/her performance 作业员的绩效是否被考核
MATERIALS材料
Production materials for each operation specified in Work Instructions and under AVL control 作业指导书是否有罗列出每站所需用到的生产材料, 并列入管制.Verify production materials are revision controlled & current 检查生产材料是否有版本管制及目前版本状况 Handling & storage guidelines called out in Work Instruction 作业指导书中是否定义材料处理&存储办法.Compliance with handling & storage guidelines documented 材料处理&存储办法是否被有效执行 Scrap and nonconforming material is isolated from normal production 废料和不良品是否与良品隔离 Material preparation operations documented and controlled 备料动作有无文件说明并被控制 Controlled by an effective FIFO system 是否有一个有效的先进先出的系统,并被执行 Verify traceability of materials 验证材料的可追溯性 Self audit system to ensure correct material usage 有无自检系统以确保材料的正确使用 Materials are clearly marked/identified on line and storage area 在产线上及存储区的材料是否有清楚的鉴别标识 EQUIPMENT / TOOLING / FIXTURES仪器/工具/治具
Calibration校准
Preventive maintenance(PM)records and schedules, maintenance log
预防保养履历记录,时间表,保养日志
Hour log maintained between PM’s, replacement, etc.预防保养，更换等有无做时间记录，按小时数实施
Tooling & fixtures identified by part number and revision
工治具编号与版本
Operating procedure available at each operation
是否有对应于每一操作的作业程序
Cycle count management / hour log for tooling
对工具模具有无做周期循环/小时数管理
ECO/ECN tracking
工程变更单/工程变更通知跟踪
Machine & tool capability studies performed and on file
是否完成仪器工具性能研究并保存相关文件
ESD CONTROL(IF APPLICABLE)静电管制(如 可适用)
Training records for all personnel 对所有相关人员的培训记录 Daily test logs in place 现场测试日报 All ESD systems in good working order and are properly installed and maintained
所有正常控制的静电系统是否被恰当地安装并保养维护 ESD earth ground rod is checked for grounding impedance and recorded on annual basis 是否每年检查ESD接地棒对地阻抗并记录 ESD grounding main system is checked for grounding impedance and recorded on monthly basis 是否每月检测ESD接地系统对地阻抗并记录 Instrument/fixtures/benches are checked for grounding impedance and recorded on weekly basis 是否每周检测并记录仪器设备/治具/椅子等对地阻抗 Wrist/heel strip, and/or conductive shoes are checked and recorded by shift 是否每班检测并记录静电手环或传导鞋。Wireless wrist strip is not allowed unless used with ionic blower and conductive floor 无线手环是不被允许的，除非在离子吹风机和传导地板环境中使用 All semiconductor materials are in ESD free container, package or bin when/during storage, transfer, and handling 所有半导体材料在存储，运输及搬运中必须用防静电容器，防静电袋等进行静电防护。People, semiconductor materials, machines, instrument, tools, fixtures, and working benches at ESD sensitive operation stations are grounded 在静电敏感站的人员，半导体材料，机器，工具，治具及工作桌椅必须接地。QUALITY CONTROL品质控制
Effective SPC in place and closed loop corrective action is taken when out-of-control occurs 现场是否有做有效的SPC管制，当超出管制点时是否做CLCA。Control limits of control chart are reviewed on monthly basis 是否每月审查管制图之上下限 Effective Continuous Improvement Process(CIP)in place 现场是否实施有效持续改进过程 Quality acceptance/rejection criteria established for each process step 每段制程是否建立允收/拒收标准 Effective quality inspection and measurement capability in place at each inspection station 在每一个检验站是否有进行有效的品质检验与测量 Evidence that operators receive quality feedback and are responsible for the quality of their work 是否保证作业员可收到品质反馈并改进他们作业品质。Self audit system in place and effective 是否有自我稽核系统并有效实施 PRODUCTION PROCESS / FLOW生产制程/流程
Does layout prevent misrouting of product and minimize handling 线体设置是否能保证制程顺畅（产品不滞流）以达成最少的人工处理。Evaluate physical layout for proper line balance and potential bottlenecks 线体规划有无对其平衡及潜在瓶颈进行评估 Is flow of defective product documented 是否有文件定义不良品的处理流程 Is line stop criteria documented and enforced to prevent excessive buildup of defective
product 是否有文件定义停线标准以强迫防止生产额外不良品 Iscustomer’sprocess flow documented 是否文件化客户制程流程 TEST PROCESS测试过程
Verify that test process is documented 检查测试步骤方法是否文件化 Is test equipment and software under revision control 是否有对测试仪器与软件进行版本管制 Test yield and defect data collection system exists, is automated and collects all data 现有的测试单元及不良数据收集系统是否是自动化以及是否能够收集到所有数据 Feedback to the defect source from test yields and defect data for improvement 测试区域是否能及时反馈不良以加以改善 Test process and production flow prevents test escapes or misrouting of product 测试过程以及生产流程是否可以防止测试漏失及保证生产顺畅 FAILURE ANALYSIS PROCESS不良分析过程
Is process documented
该制程是否文件化
Are production materials and repair materials effectively controlled to prevent misrouting or wrong parts being used
对生产及维修材料进行有效地控制以防止用错料。
Are there proper skills, training, and equipment to support failure analysis
是否有适当的技巧，培训及设备支持不良分析
Age and quantity of debug WIP is controlled
是否对调试工具的使用年限及数量进行控制。
Effective method to prioritize debug activities
使用有效的方法对调试动作优先顺序进行区分
Failure analysis output drives corrective actions
是否能从不良分析之结果得出改善措施
Failure analysis data communicated to 客户 on regular basis
是否能定期将不良分析数据传送给客户
Process in place to verify effectiveness of FA and corrective actions
是否有适当的过程来验证不良分析及改善措施的有效性
Process in place to evaluate No Fault Found defects(also CND – Can Not Duplicate)使用适当的方法评估no fault found不良。
Rework Processrework过程
Procedures for each type of rework operation
确定每种类型返工的流程
Proper tools in place to rework all production materials and components used
在适当地方中使用适当工具rework所有的制造材料和元件
Data collection for all rework performed
收集所有rework数据
Data collection automated / filing computerized
数据收集自动化 / 用计算机进行整理 Data feedback to defect source 将数据反馈到不良源中心 Accept/reject criteria defined and available at rework station 对接收/拒收标准进行定义以及是否可以应用于Rework站 Verification of rework quality 验证rework质量 Documented process flow for rework operations 对rework操作的流程进行文件化 Reworked material marked(physical marking or computer scan)对已rework材料进行标注(对其本身进行标注或计算机扫描)Rework history available for all reworked materials 将所有rework材料列入可用的rework档案 Reworked materials go through proper test and inspection re-flow channel 对已rework材料进行适当的测试及回流检验 PACKAGING / SHIPPING PROCESS 包装/出货过程
Procedure in place at packaging and shipping station 在包装及出货站是否有适当的流程 Procedures are part number specific 该流程是否区分不同的料号 Procedures comply with customer’s Packaging and Shipping spec 该流程应与客户包装与出货规格一致。RMA PROCESS FOR RETURNED MATERIAL 对于退回材料的RMA过程
RMA process documented RMA过程是否文件化 RMA test process flow documented RMA测试流程是否文件化 System in place to keep line and field returns segregated 是否有适当的系统将产线与市场返回品进行隔离 Closed loop corrective action process in place 是否有适当的CLCA流程 Minimum shippable revision level control and marking system in place 是否有适当的最小装载版本水平控制及标识系统 Data collection for all rework performed对所有Rework过程的数据进行收集 Data collection filing computerized 使用计算机对收集的数据进行处理 Data feedback to defect source 将数据反馈到不良源中心
第二篇：中英文对照A
《美国口语惯用法例句集粹》Ａ
A(Page 1-4)
1.about
1)
2)
3)
4)
5)
6)
7)I'd like to know what this is all about.我想知道这到底是怎么回事。How about a fish sandwich? 来一块鱼肉三明治怎么样？What about me? 我怎么样？I'm not about to go in that old house.我是不会进那幢旧房子的！Yes I remember that night.What about it? 是的，我记得那个晚上，那又怎样？What's this all about? 这到底是怎么回事？It's about time you showed up!差不多是你该露面的时候了。
2.above
1)
2)Above all, I want everything quiet.首要的是：我要一切保持安定。Tom thinks he's above hard work.汤姆认为自己没必要努力工作。
3.act
1)
2)
3)
4)
5)
6)Would you please act out what happened? 你能把发生的事演示一下吗？Watch Ricky.He sometimes likes to act up in class.注意里基，他又是喜欢在课堂上捣蛋。That profane comedian needs to clean up his act.那个爱说粗言秽语的喜剧演员应该净化一下自己的言行。We need to get our act together and come to see you.我们需要统一意见后来见你。The newspapers called the earthquake an act of God.报纸上称那次地震为天灾。Masa is a class act.玛莎是位杰出的女性。
4.action
1)
2)
3)
4)We're going to bring action against our debtors.我们打算控告我们的债务人。Did you see any action in yesterday's ballgame? 昨晚的棒球比赛中你看到有什么有趣的精彩场面吗？Our community is going to take action against the proposed waste dump.我地区要采取行动反对那项垃圾处理场的提案。Jim wants to go where the action is.吉姆想去有刺激性的地方。
5.advantage
1)
2)Our opponents have a height advantage on us.我们的对手在身高上比我们占有优势。Nobody likes to be taken advantage of.没有人喜欢被捉弄（或：被欺骗、利用）
6.after
1)
2)
3)
4)I think that girl is after you.我想那女孩是在追你。It looks like things are gonna work out after all.看起来事情终会解决的。This soft drink has a nasty aftertaste.这软饮料有种让人难受的余味。I see your point, but don't you think it's way after the fact.我明白你的意思，但你不觉
得这已是“事后诸葛亮”了吗？
7.again
1)I could go to Japan again and again.我可以一而再、再而三地去日本。（注：意指不会感到
厌倦）
8.age
1)
2)Would you please act your age!请你做事要有一个与自己年龄相称的样子。This is a “coming of age” movie.这是一部成人影片。
9.air
1)
2)
3)
4)
5)
6)
7)
8)
9)I need to go outside and get some air.我需要出去呼吸点新鲜空气。I don't know what's wrong, but can feel it in the air.虽然我不知道到底是出了什么差错，但我能隐隐约约感觉到。Mike was sad when they took his favorite program off the air.当迈克喜欢的节目被取消时，他感到很伤心。The sale of our house is still up in the air.我们的房子出勤率售一事还没有最后定下来。After winning the championship, I felt I could walk on air.获得冠军后，我飘飘欲仙。Your sister is such an airhead.你姐姐真是来个没有头脑的人。Janet Jackson's new song is getting lots of airplay.珍妮〃杰克逊的新歌到处都在不断地播放。That last time I took a plane, I got airsick.上次我乘飞机时晕机了。I hope there's no bad air between us.我希望我们之间的关系不要很别扭。
10.all
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)It's looks like we won't be going after all.看起来最后我们还是不能去。We've all but finished the project.我们已几乎完成了那个项目。All in all I'd say it's been a very productive day.总的来说，我认为这一天过得很充实。Let's go all-out and win this game!让我们尽全力来打赢这场比赛。We knew it was all over when we saw the building burst.当我们看见那座建筑突然起火时，我们知道一切全完了。We wish you all the best.我们大家祝福你一切如意。If it's all the same to you, I'd just as soon not go.如果这对你都是一回事的话，我就不想去了。They were running from the police like all get-out.他们以极快的速度逃脱警察的追赶。I didn't see them come in at all.我根本高没有发现他们的进来。Let's settle this matter once and for all.让我们来把这个问题一次性地彻底解决掉。Mark is an all-around athlete.马克是一个全能运动员。Did you get to play in the all-star game? 你入选全明星队的比赛了吗？He bloke the all-time record in the 100-meter run at his school.他打破了他所在的学校
100米跑的历史最高记录。
11.alley
1)Working on cars isn't up my alley.修理汽车不是我拿手的活儿。
12.alone
1)
2)I just wanna be left alone.我只是想一个人呆会儿。Can't you just leave well enough alone? 你不能少管一些闲事吗？
13.along
1)
2)You knew all along what was going on.你从一开始就知道所发生的事。Debbie doesn't get along with Steve.戴比和史蒂夫相处得不好。
1)
2)
3)
4)
5)Mr.Pak came here searching for the American dream.帕克先生来到这儿寻求他的“美国梦”。Some foreigners become Americanized while living in the U.S.一些外国人在美国居住时被美国化了。Not having any job freedom would be totally unAmerican.没有选择职业的自由是完全违背美国精神传统的。Bill is an all-American quarterback.比尔是全美（橄榄球）明星赛的四分卫队员。I just can't go on the American way.我无法适应美国方式。
15.animal
1)
2)Water-skiing really brings out the animal in Tom.滑水运动真正激发出了汤姆的活力与激情。The young actor emits a lot of animal magnetism on the screen.那个年轻演员在荧幕
上充分显示出他的性魅力。
16.answer
1)I called Emi but there was no answer.我给埃米打了电话，但是没人接。
17.apple
1)
2)
3)
4)
5)Have you ever been to the Big Apple? 你去过纽约吗？Do I sense an apple of discord between you two? 你问我有没有感觉出你们两人之间的不和，是吗？Heather is the apple of my eye.希瑟是我的掌上明珠。Rita likes to keep everything in apple-pie order.丽塔喜欢把一切都弄得井井有条。Dennis has always been an apple polisher.丹尼斯一直就是一个马屁精。
18.arm
1)
2)
3)
4)You don't have to twist my arm to get me to go with you.用不着你强迫我跟你走。My father is a hopeless armchair quarterback.我爸爸是一个没救了的纸上谈兵的人。The suspects are armed and dangerous.嫌疑犯带有武器，十分危险。Every spring the park is filled with lovers walking arm in arm.每到春天公园里到处都是
手挽手散步的恋人。
19.around
1)
2)Coach Johnson has been around for 30 years.约翰逊教练已有三十年的经验了。Someone is on duty here around-the-clock.有人在这里昼夜值班。
20.as
1)
2)
3)
4)
5)
6)It looks as if someone has already been here.看起来在人来过这里了。As for me, I'm going home.至于我，我准备回家。Marty is acting as if nothing happened.马蒂表现得像什么也没发生过一样。I want this room left as is.我希望这间房子保持原样。The changes will begin taking place as of tomorrow.变动从明天开始实施。Police are baffled as to the whereabouts of the kidnappers.警察局搜寻绑架者的工作受
挫。
1)
2)
3)
4)Our gas bill average about $50 a month.我们每个月的煤气费平均50美元。On the average, I'd say we eat chicken once a week.我们平均每周吃一次鸡肉。Kent describes himself as just an average Joe.肯特视自己为一名普通的美国人。On the average day, over 100,000 kids bring guns to school in the U.S.在美国平常日
子里，有100,000个孩子带手枪去上学。
22.away
1)
2)
3)
4)
5)What makes you think you're gonna get away with this? 是什么使你认为你可以免受处罚？I wish they'd do away with these complicated tax forms.我希望他们能费除掉这些复杂的税务表格。We're planning a weekend getaway for our anniversary.我们正在为庆祝我们的纪念日而安排一次周末的外出活动。Tom wants to run away from home.汤姆想从家里出逃。Dave and Kathy are going to steal away on vacation.戴夫和凯茜计划在假期里偷偷跑出
去。
第三篇：中英文对照
AEROFLEX “亚罗弗”保温 ALCO “艾科”自控 Alerton 雅利顿空调 Alfa laval阿法拉伐换热器 ARMSTRONG “阿姆斯壮”保温 AUX 奥克斯
BELIMO 瑞士“搏力谋”阀门 BERONOR西班牙“北诺尔”电加热器 BILTUR 意大利“百得”燃烧器 BOSIC “柏诚”自控 BROAD 远大
Burnham美国“博恩汉”锅炉 CALPEDA意大利“科沛达”水泵 CARLY 法国“嘉利”制冷配件 Carrier 开利 Chigo 志高
Cipriani 意大利斯普莱力
CLIMAVENETA意大利“克莱门特” Copeland“谷轮”压缩机 CYRUS意大利”赛诺思”自控 DAIKIN 大金空调
丹佛斯自控 Dorin “多菱”压缩机
DUNHAM-BUSH 顿汉布什空调制冷 DuPont美国“杜邦”制冷剂 Dwyer 美国德威尔 EBM “依必安”风机
ELIWELL意大利“伊力威”自控 Enfinilan 英国“英菲尼兰“阀门 EVAPCO美国“益美高”冷却设备 EVERY CONTROL意大利“美控” Erie 怡日
FRASCOLD 意大利“富士豪”压缩机 FRICO瑞典“弗瑞克”空气幕 FUJI “富士”变频器
FULTON 美国“富尔顿”锅炉 GENUIN “正野”风机 GREE 格力
GREENCOOL格林柯尔 GRUNDFOS “格兰富”水泵 Haier 海尔 Hisense 海信 HITACHI 日立
霍尼韦尔自控 Johnson 江森自控 Kelon 科龙
KRUGER瑞士“科禄格”风机 KU BA德国“库宝”冷风机 Liang Chi 良机冷却塔 LIEBERT 力博特空调 MARLEY “马利”冷却塔 Maneurop法国“美优乐”压缩机 McQuary 麦克维尔 Midea 美的 MITSUBISHI三菱
Munters 瑞典“蒙特”除湿机 Panasonic 松下 RANCO “宏高”自控
REFCOMP意大利“莱富康”压缩机 RIDGID 美国“里奇”工具 RUUD美国“路德”空调 RYODEN “菱电”冷却塔 SanKen “三垦”变频器 Samsung 三星 SANYO 三洋
ASWELL英国森威尔自控 Schneider 施耐德电气 SenseAir 瑞典“森尔”传感器 SIEMENS 西门子
SINKO ",28商机网;新晃“空调 SINRO “新菱”冷却塔 STAND “思探得”加湿器 SWEP 舒瑞普换热器 TECKA “台佳”空调 Tecumseh“泰康”压缩机 TRANE 特灵
TROX德国“妥思”风阀 VASALA芬兰“维萨拉”传感器 WILO德国“威乐”水泵 WITTLER 德国”威特”阀门 YORK 约克
ZENNER德国“真兰”计量
第四篇：中英文对照
医院中英文对照
发热门诊Have Fever主治医师Doctor-in-charge 供应室Supply Room谢绝入内No entering 红灯亮时谢绝入内No entering when red light
彩超、心电图Colorful Cardiogram/ECG住院楼Inpatient Building 透析血磁EndoscopeDept.护士Nueser康复理疗科RehabilitationPhysiotherapyDept.中药计价China medical price account肛肠科Ano-proctology
皮肤、肛肠、男性科、泌尿科候诊Dermatology、Ano-proctology、male Urology Clinic 皮肤科、肛肠科、男性科、泌尿科Dermatology、Ano-proctology、male Urology Dept 中医科Traditional Chinese Medicine五官科ENT Dept.男性科、泌尿科 Male urology Dept.安全出口Exit
预防保健科Medical center for health preventionand care
后勤科、药库Logistic Room、Seore入院登记In-patient Admisson 高压氧治疗Hyperbaric Oxygehation Therapy碎石中心ESWL Center 急救中心Emergency Center挂号收费Registration
中心药房Cenreral Pharmacy内科门诊Internal Medicine Clinic会议室Meeting Room手外科Hand Surgery 产科Obstentrics Dept.骨外科Orthopedics Dept.神经、烧伤外科Neurosurgery.Plaseric surgey Dept.麻醉科Anaesthesiology手术室Operation Room 泌尿、肿瘤外科Urologic.Gumorsurgery Dept.妇科Gynecology Dept.内二科Internal Medicine.Ward 2产房及爱婴中心Delivery Room内一科Internal Medicine.Ward 1洗手间Toilet
普外、胸外科Surgey、Thoracic Surgey Dept.皮肤科Dermatology Dept.中医骨伤科Traditional Mediaine or Thopaedics餐厅Dining Room 配餐室Pantry Room后勤科Logistics Dept.电工室Electrician Room接待室Dermatology Room 内、儿科候诊 Internal medicine.Pediatrics功能检查候诊Function Exam 中医科候诊TCM Clinic放射科候诊Radiology Clinic 妇科门诊Gynecology Dept.产科候诊Obstentrics Clinic 肛肠科候诊Ano-proctology妇科候诊Gynecology Clinic 产科门诊Obstentrics Dept.五官科候诊ENT.Clinic 外科候诊Surgery Clinic输液中心Transfusion Center 皮肤、泌尿科候诊 Dermatology.Male Urology Clinic检验候诊Clinical Laborotories 家属休息Relation Rest Room口腔科门诊Stomatology Clinic 内儿科Internal Medicine.Pediaarics镜检科Endoscope Dept.外科Surgrey Dept.检验中心Laboratory Center 功能检查Function Exam Dept.登记处Registration 预防保健门诊Hygine ＆ Public Health Dept.收费处Cashier 美容科、镜检科门诊 Cosmetology Dept.Endoscope Clinic
收费健康发证Gharge lssue Bill of Health试敏观察室Scratch Espial Room
第五篇：中英文对照
共轨技术
随着人们对低油耗、低废气排放、发动机低噪声的需求越来越大，对发动机和燃油喷射系统的要求也越来也高。对柴油发动机燃油喷射系统提出的要求也在不断增加。更高的压力、更快的开关时间，以及根据发动机工况修订的可变的流量速率曲线，已经使得柴油发动机具有良好的经济性、低污染、高动力性，因此柴油发动机甚至进入了豪华高性能轿车领域。达到这些需求的前提是拥有一个可以精确雾化燃油并具有高喷油压力的燃油喷射系统。同时，喷油量必须精确计算，燃油流量速率曲线必须有精确的计算模型，预喷射和二次喷射必须能够完成。一个可以达到以上需求的系统即共轨燃油喷射系统。
共轨系统包括以下几个主要的部分： ①低压部分，包含燃油共轨系统组件。
②高压系统，包含高压泵、油轨、喷油器和高压油管等组件。
电控柴油机系统EDC主要由系统模块，如传感器、电子控制单元和执行机构组成。共轨系统的主要部分即喷油器。它们拥有一个可以快速开关喷嘴的执行阀(电磁阀或压电触发器)，这就允许对每个气缸的喷射进行控制。
所有的喷油器都由一个共同的油轨提供燃油，这就是“共轨”的由来。在共轨燃油喷射系统中，燃油喷射和压力的产生是分开的。喷油压力的产生与发动机转速和喷油量无关。EDC控制每个组件。
(1)压力产生。
燃油喷射和压力的产生是通过蓄能器分离开来。将具有压力的燃油提供给为喷射做好准备的共轨系统的蓄能器。
由发动机驱动的连续运转的高压泵提供所需喷油的压力。无论发动机的转速高低，还是燃油喷射量的多少，油轨中的压力均维持在一定值。由于几乎一致的喷油方式，高压泵的设计可以小的多，而且它的驱动转矩可以比传统燃油喷射系统低，这源于高压泵的负载很小。
高压泵是径向活塞泵，在商用车上有时会使用内嵌式喷油泵。(2)压力控制
所应用的压力控制方法主要取决于系统。
一种控制油轨压力的方式是通过一个压力控制阀对高压侧进行控制。不需喷射的燃油通过压力控制阀流回到低压回路。这种控制回路允许油轨压力对不同工况(如负载变化时)迅速做出反应。
在第一批共轨系统中采用了对高压侧的控制。压力控制阀安装在燃油轨道上更可取，但是在一些应用中，它被直接安装在高压泵中。
另一种控制轨道压力的方式是进口端控制燃油供给。安装在高压泵的法兰上的计量单元保证了泵提供给油轨精确的燃油量，以维持系统所需要的喷油压力。
发生故障时，压力安全阀防止油轨压力超过最大值。
在进口端对燃油供给的控制减少了高压燃油的用量，降低了泵的输入功率。这对燃油消耗起到积极的作用。同时，流回油箱的燃油温度与传统高压侧控制的方法相比得到了降低。
双执行器系统也是一种控制轨道压力的方式，它通过计算单元对压力进行控制，并且通过压力控制阀对高压端进行控制，因此同时具备高压侧控制与进口端燃料供给控制的优势。
(3)燃油喷射
喷油器直接将燃料喷到发动机的燃烧室。它们由与燃油轨道直接相连的短高压油轨提供燃油。发动机的控制单元通过与喷油器结合在一起的控制阀的开闭控制喷油嘴的开关。
喷油器的开启时间和系统油压决定了燃油供给量。在恒压状态下，燃油供给量与电磁阀的开启时间成正比，因此与发动机或油泵的转速(以时间为计量的燃油喷射)无关。
(4)液压辅助动力
与传统燃油喷射系统相比，将压力的产生与燃油的喷射分离开来，有利于燃烧室的充分燃烧。燃油喷射压力在系统中基本可以自主选择。目前最高燃油压力为1600巴，将来会达到1800巴。
共轨系统通过引入预喷射或多次喷射可以进一步减少废气排放，也能明显降低燃烧噪声。通过多次触发高速转换阀的开闭可以在每个喷射周期内实现多达5次的喷射。喷油针阀的开闭动作是液压辅助元件助力的，以保证喷射结束的快速性。
(5)控制和调节
发动机的控制单元通过传感器检测加速踏板的位置以及发动机和车辆的当前工况。采集到的数据包括：
① 曲轴转速和转角； ② 燃油轨道的压力； ③ 进气压力；
④ 进气温度、冷却液温度和燃油温度； ⑤ 进气量； ⑥ 车速等。
电控单元处理输入信号。与燃烧同步，电控单元计算施加给压力控制阀或计算模块、喷油器和其他执行机构(如EGR阀，废气涡轮增压器)的触发信号。
喷油器的开关时间应很短，采用优化的高压开关阀和专业的控制系统即可实现。
根据曲轴和凸轮轴传感器的数据，对照发动机状态(时间控制)，角度/时间系统调节喷油正时。电控柴油机系统(EDC)可以实现对燃油喷射量的精确计算。此外，EDC还拥有额外的功能以进一步提高发动机的响应特性和便利性。
其基本功能包括对柴油燃油喷射正时的精确控制，和在给定压力下对油量的控制。这样，它们就保证了柴油发动机具有能耗低、运行平稳的特点。
其他开环和闭环控制功能用于减少废气排放和燃油消耗，或提供附加的可靠性和便利性，具体例子有：
① 废气在循环控制； ② 增压控制； ③ 巡航控制；
④ 电子防盗控制系统等。(6)控制单元结构。
由于发动机控制单元通常最多有8个喷油器输出口，所以超过八缸的发动机需要两个控制单元。它们通过内置高速CAN网络的“主/从”接口进行连接，因此也拥有较高的微控制器处理能力。一些功能被 分配给某个特定的控制单元(如燃料平衡控制)，其功能根据需求情况(如检测传感器信号)可以动态地分配给一个或多个控制单元。
The Common Rail Calls for lower fuel consumption, reduced exhaust-gas emission, and quiet engines are making greater demands on the engine and fuel-injection system.The demands placed on diesel-engine fuel-injection systems are continuously increasing.Higher pressures, faster switching times, and a variable rate-of-discharge curve modified to the engine operating state have made the diesel engine economical, clean, and powerful.As a result, diesel engines have even entered the realm of luxury-performance sedans.These demands can only be met by a fuel-injection pressure.At the same time the injected fuel quantity must be very precisely metered, and the rate-of-discharge curve must have an exact shape, and pre-injection and secondary injection must be performable.A system that meets these demands is the common-rail fuel-injection system.The main advantage of the common-rail system is its ability to vary injection pressure and timing over a broad scale.This was achieved by separating pressure generation(in the high-pressure pump)from the fuel-injection system(injection).The rail here acts as a pressure accumulator.Principle of the Common Rail The common-rail system consists of the following main component groups: ① The low-pressure stage, comprising the fuel-supply system components;② The high-pressure system, comprising components such as the high-pressure pump, fuel-rail, injector, and high-pressure fuel lines.The electronic diesel control(EDC), consisting of system modules, such as sensors, the electronic control unit, and actuators.The key components of the common-rail system are the injectors.They are fitted with a rapid-action valve(solenoid valve or piezo-triggered actuator)which opens and closes the nozzle.This permits control of the injection process for each cylinder.All the injectors are fed by a common fuel rail, this being the origin of the term “common rail”.In the common-rail fuel-injection system, the function of pressure generation and fuel injection are separate.The injection pressure is generated independent of the engine speed and the injected fuel quantity.The electronic diesel control(EDC)controls each of the components.(1)Pressure Generation.Pressure generation and fuel injection are separated by means of an accumulator volume.Fuel under pressure is supplied to the accumulator volume of the common
rail ready for injection.A continuously operating high-pressure pump driven by the engine produces the desired injection pressure.Pressure in the fuel rail is maintained irrespective of engine speed or injected fuel quantity.Owing to the almost uniform injection pattern, the high-pressure pump design can be much smaller and its drive-system torque can be lower than conventional fuel-injection systems.This results in a much lower load on the pump drive.The high-pressure pump is a radial-piston pump.On commercial vehicles, an in-line fuel-injection pump is sometimes fitted.(2)Pressure Control The pressure control method applied is largely dependent on the system.One way of controlling rail pressure is to control the high-pressure side by a pressure-control valve.Fuel not required for injection flows back to the low-pressure circuit via the pressure-control valve.This type of control loop allows rail pressure to react rapidly to changes in operating point(e.g.in the event of load changes).Control on the high-pressure side was adopted on the first common-rail systems.The pressure-control valve is mounted preferably on the fuel rail.In some applications, however, it is mounted directly on the high-pressure pump.Another way of controlling rail pressure is to control fuel delivery on the suction side.The metering unit flanged on the high-pressure pump makes sure that the pump delivers exactly the right quantity of fuel rail in order to maintain the injection pressure required by the system.In a fault situation, the pressure-relief valve prevents rail pressure from exceeding a maximum.Fuel-delivery control on the suction side reduces the quantity of fuel under high pressure and lowers the power input of the pump.This has a positive impact on fuel consumption.At the same time, the temperature of the fuel flowing back to the fuel tank is reduced in contrast to the control method on the high-pressure side.The two-actuator system is also a way of controlling rail pressure, which combines pressure control on the suction side via the metering unit and control on the high-pressure side via the pressure-control valve, thus marrying the advantages of high-pressure-side control and suction-side fuel-delivery control.(3)Fuel Injection.The injectors spray fuel directly into the engine’s combustion chambers.They are supplied by short high-pressure fuel lines connected to the fuel rail.The engine control unit controls the switching valve integrated in the injector to open and close
the injector nozzle.The injector opening times and system pressure determine the quantity of fuel delivered.At a constant pressure, the fuel quantity delivered is proportional to the switching time of the solenoid valve.This is, therefore, independent of engine or pump speed(time-based fuel injection).(4)Potential Hydraulic Power.Separating the functions of pressure generation and fuel injection opens up future degrees of freedom in the combustion process compared with conventional fuel-injection systems;the injection pressure at pressure at present is 160 MPa;in future this will rise to 180 MPa.The common-rail system allows a future reduction in exhaust-gas emissions by introducing pre-injection events or multiple injection events and also attenuating combustion noise significantly.Multiple injection events of up to five per injection cycle can be generated by triggering the highly rapid-action switching valve several times.The nozzle-needle closing action is hydraulically assisted to ensure that the end of injection is rapid.(5)Control and Regulation.The engine control unit detects the accelerator-pedal position and the current operating states of the engine and vehicle by means of sensors.The data collected includes:
① Crankshaft speed and angle;② Fuel-rail pressure;③ Charge-air pressure:
④ Intake air, coolant temperature, and fuel temperature: ⑤ Air-mass intake: ⑥ Road speed, etc.The electronic control unit evaluates the input signals.In sync with combustion, it calculates the triggering signals for the pressure-control valve or the metering unit, the injectors, and the other actuators(e.g.the EGR valve, exhaust-gas turbocharger actuators, etc.).The injector switching times, which need to be short, are achievable using the optimized high-pressure switching valves and a special control system.The angle/time system compares injection timing, based on data from the crankshaft and camshaft sensors, with the engine state(time control).The electronic diesel control(EDC)permits a precise metering of the injected fuel quantity.In
addition, EDC offers the potential for additional functions that can improve engine response and convenience.The basic functions involve the precise control of diesel-fuel injection timing and fuel quantity at the reference pressure.In this way, they ensure that the diesel engine has low consumption and smooth running characteristics.Additional open-and close-loop control functions perform the tasks of reducing exhaust-gas emissions and fuel consumption, or providing added safely and convenience.Some examples are:
① Control of exhaust-gas recirculation;② Boost-pressure control;③ Cruise control;
④ Electronic immobilizer, etc.(6)Control Unit Configuration.As the engine control unit normally has a maximum of only eight output stages for the injectors, engines with more than eight cylinders are fitted with two engine control units.They are coupled within the “ master/slave ” network via an internal, high-speed CAN interface.As a result, there is also a high microcontroller processing capacity available.Some functions are permanently allocated to a specific control unit(e.g.fuel-balancing control).Other can be dynamically allocated to one or many of the control units as situation demand(e.g.to detect sensor signals).
点击咨询 