第一篇：在国外怎么用英语叫出租车？（最终版）
英语最前线
深圳龙华成校
在国外怎么用英语叫出租车？
你知道怎么用英语叫出租车吗？你知道怎么让酒店服务生帮忙叫车吗？不知道的快来恶补一下！
第一件事...首先想想您该如何开始您的请求：
问候
“Hello”你好
“Good morning”早上好 “Good afternoon”下午好 “Good evening”晚上好
打电话叫出租车
“May I have a taxi at„?”我可以在...叫辆出租车吗？
“Could you send a taxi to„?”您能安排一辆出租车到...吗？ “I’d like to order a taxi„”我想预定一辆出租车...“Could I book a taxi„?”我能订辆出租车...吗？
“I’d like a taxi immediately/as soon as possible please.”我想马上叫辆出租车。
检查出租车在哪儿
您的出租车没有准时出现，所以您需要知道具体原因：
“Hello, my name is Mr.Smith.I ordered a taxi for 8p.m.at XYZ Street.It’s 8:15 now.Could you check what has happened please?”您好，我是史密斯先生。我订了辆出租车晚上8点到XYZ街。现在是晚上8：15了。您能帮我查一下出了什么问题吗？
“Can you make sure one arrives as soon as possible?”您能确保一辆车马上就到吗？
在宾馆
您正在宾馆，想让宾馆的员工帮您安排辆出租车，您询问前台：
“Could you organize a taxi for me for this evening please? I need to be picked up at 7p.m to go out for a business dinner.”您今晚能帮我安排一辆出租车吗？我想晚上7点出发去赴宴。
“Could you book a taxi to take me to the train station tomorrow morning please? I need to be at the station at 8:30a.m.What time do you think should I leave?”您能帮我订辆出租车明早上送我到火车站吗？我早上8：30需赶到。您觉得我什么时候离开比较好？
您询问门卫
“Excuse me, could you hail a taxi for me please?”打扰一下，您能帮我叫辆出租车吗？
“Excuse me, I need a taxi please.”打扰一下，我现在需要叫辆出租车。
“Excuse me, could you get a taxi for me please?”打扰一下，您能帮我叫辆出租车吗？
英语最前线
深圳龙华成校
您想提前知道坐出租车大概要多少钱
“How much is the typical taxi fare to the airport/train station/city centre etc?”坐出租车到机场/火车站/市中心...大概需要多少钱呢？ 在出租车内
您需要告诉司机您想去哪儿：
“Could you take me to ‘The Irish Pub’ on 123 XYZ Street please?” 您能送我到123 XYZ街的‘The Irish Pub’吗？
您需要告诉司机您很着急：
“I’m really in a hurry, so can you take the quickest route please?”我实在是很赶时间，您能尽量开最快的速度吗？
在美国，有一个非正式的短语意思是让司机开快点： “Please step on it!”请开快点！
您不确定您是否在正确的地点：
“Are you sure this is 123 XYZ Street? I can’t see ‘The Irish Pub’.”您确定这是123 XYZ街吗？我看不到‘The Irish Pub’。
您想知道该付多少钱：
“How much is the fare please?”请问多少钱？ “How much do I owe you?”我该付您多少钱？
您觉得服务很好，想给出租车司机一点小费： “Keep the change.”不用找零了。
然后，如果司机感谢您：
“You’re welcome.”不客气。
第二篇：修井工在国外(修井英语教程)
1、Good evening ,I don’t believe we have met before, let me introduce myself ,I’am Chen
晚上好，我们以前没见过面，我自我介绍一下，我的名字叫陈一明。
2、I come from china 我来自中国。
3、Customs 海关
4、Where is the customs 海关在哪里？
5、Is the customs examination here? 海关检查是在这吗？
6、Please show me your passport.请把你的护照给我看看。
7、Here you are 给你
8、Anything to declare？ 你有什么要申报的吗？
9、Have you got any suitcase? 你带手提箱了吗？
10、Would you mind opening the case ? Right that’s all 请打开皮箱。好了检查完毕了。
11、Passport and embarkation card please.请拿出护照及入境证。
12、Is your visit on business or pleasure? 你是经商还是旅游？
13、How long will you staying? 你要停留多长时间？
14、About four months 四个月左右
15、What your purpose of your visit ?你旅行的目的是什么？
16、On business 因公
17、What’s inside this package 这包里是什么？
18、Got any cigarettes or Spirits /wine?你有香烟和酒吗？
19、Good noon, sir could I have your passport and ticket please?午安，先生请将护照和机票给我好吗？
20、Your seat is 26C,boarding time is twenty minutes before departure and you will board at gate 18.Have a nice flight.你的座位是26C，登机时间是起飞前20分钟，在18号门登机。祝你旅途愉快！
21、Can you tell me the cost of the room?请把房间费用告诉我?
22、How much do you charge for one per day 一间房子每天多少钱？
23、Excuse me could you show me the way to the post office? 请问能不能告诉我到邮局怎么走？
24、How can I get to the railway station?我怎样到火车站？
25、Hello！This is the company.喂，这是修井公司。
26、Is Mr.Eton in ,please? 请问伊顿先生在不在？
27、I said the meeting has been changed to half-past two.Can you hear me ? 我说会议改到两点半你听清楚了吗？
28、I see ,is there anything else? 明白了，还有其他事吗？
29、What’s the time now ?现在几点了？ 30、It’s four twenty 现在是四点二十。
31、May I trouble you to tell me the time ?麻烦你可以告诉我现在几点吗？
32、What’s the date today?今天是几号？
33、What day is today ?今天是星期几？
34、What’s the weather today? 今天天气怎么样？
35、What’s the temperature today? 今天气温多少度？
36、He works as a driller in this crew他在这个队当司钻。
37、He is the most able engineer of the Second Drilling Company.他是钻井二公司最有能力的工程师。
38、We get everything in order before we leave the location.在我们离开井场之前，把一切都收拾好。
39、It’s number eighty-five of petrol(gasoline).它用85号汽油。
40、are used for raising and lower the pipes.绞车用来上提或下放钻具。
41、Now circulate, please!现在请循环泥浆！
42、Through this high pressure line, the mud is pumped into the stand pipe and drill pipe.通过这根高压管线，泥浆被泵抽入立管和钻杆。
43、If the pressure should be too high, the pump liners would crack or break into pieces.万一压力太大，泵的缸套就会破碎。
44、It would be better to reverse circulation in this case.在这种情况下，用反循环会好些。
45、Make up a joint, please!请接一个单根！
46、Break down a joint, please!请卸一个单根
47、Please pull out of hole and change bottom hole assembly(BHA)!请起钻，换下部钻具结构！
48、First of all, slug pipe, and then trip out of hole, please!请往钻杆里打点重泥浆，然后起钻！
49、Make it up one more thread, please!请再上一扣！50、Carry out drilling operation in accordance with the drilling program.按钻井程序进行钻井作业。
51、That’s a little more than I wanted to pay.Don’t you have any less expensive shirts 有点贵，有没有便宜一些的衬衣。
52、Much better.how much are they? 好多了，多少钱一双？
53、what’s size do you want ? 你穿多大号的？
54、try this and see how it feels? 试试这一双，看怎么样？
55、well what’s troubling you ?哪里不舒服？
56、Now ,let me have a look ,it is bit high.now, I want to examine your throat.open wide say“Ah”现在让我看看（温度）有点高，现在想看看你的喉咙。张开嘴说“Ah”
57、have a good rest and get plenty of sleep.You will be all right soon.here’s a prescription for some medicine.take it every two hours so that you won’t cough.好好休息，睡好觉。你很快就会康复。这是药方，没两小时吃一次，就不咳嗽。
58、how many people are there in your family.你家有几口人？
59、five，besides my parents and me ,there’s my brother and my sister.五口人。除父母和我以外，还有一个兄弟和一个妹。60、so , tell me about your family.have you got any brothers or sisters?谈一下你家庭情况，你有几个兄弟姐妹？
61、Are you married? 你结婚了吗？
62、Oh ,I’ been married for several years。啊，我结婚几年了？
63、How many crews are there in your company? 你们公司有多少个作业队？ 64、How many employees are there in your company? 你们公司有多少雇员？
65、which main equipment are there in your company? 你们公司有哪些主要设备？ 66、Which services can your company provide?你们公司能进行哪些作业？ 67、where does your company conduct the downhole operations? 你们公司在哪些地方进行井下作业？
68、how many division are there in your company?你们公司分几个部？ 69、how many people are there in a crew? 钻井队有多少人？ 70、which people may a shift include? 钻井班包括哪些人？
71、what does the driller do ?司钻干什么工作？In charge of / responsible 72、what is the responsible for ? 井架工负责什么？
73、what are the principal functions of bit? 钻头的主要作用是什么？ 74、what is meant by making a connection? 接单根指的是什么？ 75、what is kick off point ? 造斜点的深度是多少？
76、why must a round trip be performed? 为什么必须起下钻？
77、how many types are there in well completion?完井方式有几种类型？
78、what is a wildcat well ?什么是野猫井？Exploration well 探井 production well 生产井injection well注水井
79、how about the completion method? 完井方法怎么样？Completion well 完井
80、Are you able to keep the sides form caving in by mud?你们能用泥浆保持井壁不坍塌吗？ 81、when this happens ,one section of pipe will be lost in hole.这种情况一旦发生，一段钻杆就掉在井里。
Yes.we refer to it as a “fish”.是的，我们把它称为落鱼。so you have to get the “fish” out.这样，你们必须把落鱼捞出。yes.we do.是的，我们必须把落鱼捞出。
82、how much will it cost if a well has such a problem?如果一口井出现这类问题，要花多少钱？
The mud cost could run into hundreds of thousands of dollars。泥浆费可能达几十万美元。83、when was the oilfield discovered?这个油田是什么时候发现的？In 1982.84、which type of oil reservoir is it?是什么类型的油藏？ 85、It is water-drive reservoir.是水驱油藏。
86、This is the structure map we have worked out.这是我们绘制出的油田构造图。87、How nice the structure is!is it a nose structure.多好的构造，是鼻装构造吗？ 88、No ,it ’t.it is an anticline.不，不是，它是背斜构造。89、Is it a normal fault?这是条正断层吗？ 90、No ,this is not a normal fault,but a thrust one.不，这不是一条正断层，而是一条逆掩断层。91、How big is this basin area?这个盆地面积有多大？
92、This basin area covers more than twenty thousand square kilometer.这个盆地面积有两万多平方公里。
93、We now know you can produce more oil.what measures have you taken?我知道你们可以采出更多的石油。你么采取什么方法（措施）？
94、We employed the secondary recovery,that is ,water-flooding.In this way,the oil and water arew produced together,and then separated at the surface.我们采用二次采油，即注水。用这种方法又和谁一起采出来，在地面进行油水分离。
95、What’s the spacing between two wells?井距是多少？
96、Generally speaking,a well is drilled on 40-acre spacing.一般来说，井距是40英亩。97、What is the area of your oilfield in square miles?你们油田是多少平方英里？
98、About 60 square miles.that’s near 155 square kilometer.约60平方英里，约155平方公里。99、What is the average yield of the individual well in your field?你们油田平均单井产量是多少？
100、It is approximately 15 barrels of oil per day.每天约15桶油。
101、How many wells are there in this block？这个区块有多少口油井。Fifty wells.有五十口井。
102、How did you produce oil in the well? 这口井怎么采油？ At the very beginning ,oil and gas flowed out that way.在初期，油气自喷。
103、Is the oil and gas flowing all the way through?油气一直自喷吗？No,it gradually stopped flowing out that way.不，油气逐渐停止自喷。
104、So you began pumping it,right?这样，你们就开始抽油了,对么？Right,we installed a pumping unit at the surface.是的，我们在地面安装了抽油装置。
105、Has this well produced only oil all the time?这口井一直只生产原油么？No,After several months,it started producing some water along with the oil.不，几个月后，开始生产油和盐水。106、What’s the size of the block?这个区块有多大？
107、The oil bearing reservoir is 20 square kilometers.含油面积是20平方公里。108、What’s the average yield per well?每口井的平均产量是多少？
109、It’s about 10 tons per day,which is equivalent to 70 barrels.The total output is 2500 barrels per day.每天约10吨，相当于70桶。每天总产量2500桶。
110、How long has the yield been sustained ?该产量稳定多长时间？The yield had been sustained for 10years.这个产量稳定10年。
111、Is any perforator truck on the wellsite? 射孔车在井场吗？Yes ,there is one perforator truck.是的，一台射孔车在井场。
112、When dose perforating operation begin?什么时候开始射孔？Let’s start at once.让我们马上开始吧。
113、What are well pullers doing? 修井工正在干什么？They are assembling the perforating gun.他们在组装射孔枪。
114、What’s the length of the perforating gun ?射孔枪的长度是多少？The length of the perforating gun is about 10 meters.射孔枪约10米长。
115、Where is the technican of the crew?这个队的技术员在哪？ He is on the wellsite.他在井场上。
116、Let him introduce the parameter of this well?让他介绍一下这口井的参数好吗？The prodution casing size is 5-1/2inch,reservoir depth is 2500meters,reservoir static pressure is 26 Mpa.油层套管尺寸是5 1/2in，油层深度是2500m，油层静压是26Mpa.117、What is the perforated interval? 射孔井段是多少？The perforated interval is 2450-2610meters.射孔井段是2450-2610米。
118、What is probably the most important in all completion sequence for cased holes?套管井的所有完井工序中，什么是最重要的？Perforating is probably the most important.射孔可能是最重要的。
119、What function does perforating perform?射孔的功能是什么？ Perforating performs adequate communication between the wellbore and all desired zones.射孔实现井筒与预期的全部产层间的充分沟通。
120、What types are perforating guns divided into?射孔枪有哪些类型？Perforators are divided into bullet perforator,jet perforator,and hydraulic perforator.射孔枪分子弹射孔枪，聚能喷流射孔枪及水力喷射射孔枪。
121、Do you know how to operate the perforating gun?你会操作这种射孔枪吗？having been trained in a factory ,we knoe hoe to operate the perforating gun.我们在一家工厂受过培训，所以我们知道怎样操作这种射孔枪。
122、Do you know what the muzzle velocity of bullet guns is ?你知道子弹射孔枪的枪口速度是多少吗?about 3300 ft/s.枪口速度约为3300ft/s.123、What is the shot density（稠密度）of the well? 这口井的射孔密度是多少？
124、The density is10 shots per meter？ 射孔密度为10孔/米。
125、What is the penetration of jet perforators? 聚能射孔枪的穿透能力是多少？
The penetration of jet perforators is 9 in(英寸)feet（英尺）.126、Could you explain the jet perforating process? 你能解释一下穿透器的穿透机理吗？
127、Did you use through-tubing jet perforator? 你们使用过“过油管射孔枪”吗？
128、we have been using the through-tubing jet perforator for completing.我们一直用“过油管”射孔枪完井。
129、What are the advantages of through-tubing jet perforator? 过油管射孔枪的优点有哪些？
130、Many of the through-tubing guns give inadequate penetration and hole size.很多过油管射孔枪给出了不恰当的穿透能力和孔眼尺寸（hole size）。131、What malfunction can any fault in the system result in? 系统中的任何缺点可能产生什么故障？
132、This can result in an irregular or inadequate hole size, poor penetration , or no hole at all.其结果可能造成孔眼紊乱或者孔眼大小不适，低渗透率和射孔不完全。133、What is the name of this equipment? 这部设备的名称是什么？
134、It is jet（喷射）perforator.它叫聚能射孔枪。
135、How long will it take to make a trip? 起下一次管柱需要多长时间？
136、what tool do you use in perforating? 你们使用什么工具进行射孔？ 137、what had happened？ 发生什么事了？
138、A big crowd(一大群人)gathered（聚集）around the perforating truck（射孔车）, almost blocking up（阻塞）the traffic.一大群人聚集在射孔车周围，几乎把交通给整瘫痪了。139、How long will it take to finish running in hole the perforator? 下射孔枪需要多长时间？
140、We intend to finish operating in two hours.我们计划在2小时内完成。141、Are you ready？ 你准备好了吗？ Yes，we are.是的，都准备好了。
142、when do you have the operating meeting? 你们什么时候开生产会？
143、If supervisor comes here in the afternoon, we shall hold operating meeting with him.如果监督下午来了，咱就跟他一起开个会。Countdown 144、What time are you going to run in hole（下钻）the perforator?
POOH 起钻 pull out of hole
什么时候下射孔枪？
At 8 o’clock。
146、what measures do you take to insure good job performance [ pəfə:məns] and a safe job? 你们采取什么措施保障工作安全有序？Take sth to do sth 147、Procedures[prəsi:dəz]
for loading，running，and firing the gun must be carefully followed to insure good job performance and a safe job。
装料程序、射孔枪下井以及引爆均需小心地进行以确保射孔工作安全有序。148、What is an ideal（理想的）fluid=liquid（液体）for perforating? 射孔用的理想压井液是什么？
149、It refers to(适用于)a clean solid-free(无固相)fluid with a differential pressure（压力）in the wellbore（井眼）?
在井筒中具有压力差的干净无固相的压井液。
150、Is any lubricator(润滑物)used in process of perforation? 在射孔过程中使用什么防喷管吗？ One approach（方法、途径）requires the use of a large diameter(直径)lubricator on the well head.通用的方法要求在井口使用大直径防喷管
151、what method is the required（要求）differential（压差、差别）obtained by? 用什么方法达到所要求的压差？
Required differential is usually obtained by(获得)partially（一部分）or completely（完全的）filling the casing with saltwater（盐水）,fresh water（纯水）,or oil.一般是使用盐水、淡水或者原油部分或全部充满套管来达到所要求的压差。152、What kind of perforator do you think we should better use? 你认为我们最好使用哪种射孔枪？ You’d better use the jet perforator.我认为你们最好使用聚能式喷流射孔枪。
153、when operating near the upper temperature limit of low temperature charges,what approaches（方法、近似）may be used? 在接近低温炸药的上限操作时，应使用什么方法？ The following approaches can be used: A.Well can be circulated(循环)with low temperature fluid to lower the bottomhole（井底）and surrounding formation（构成）temperature.可以使用低温流体循环洗井至较低的井底及周边温度。
B.High temperature detonator(引爆装置)may be employed in guns equipped with conventional（习惯的，常用的）low temperature cyclonite charges（射孔弹）.可以在使用低温炸药装备的射孔枪中采用高温雷管。154、what conditions can normal（正常）=abnormal(不正常)pressure oil well be perforated with? 常压油井什么条件下可以射孔？
Normal pressure oil well can be perforated with oil or water in the hole with through-tubing guns(过油管射孔枪)using conventional wellhead control.正常压力的油井，可以在井筒中充满原油或水，使用过油管射孔枪射孔，射孔时采用普通井口控制装置。
155、how are gas wells and high pressure oil wells perforated? 怎样对气井和高压油井进行射孔？
A grease(油脂)seal（密封）lubricator（防喷管）should be used on all gas wells,and oil wells with surface pressures anticipated（预期）to be greater than 1000 psi after perforating.在所有气井以及预期射孔后井口压力大于1000psi 的油井上，都应该使用润滑脂密封防喷管。
156、which type of completion is the most prevailing(主要，普遍)method of finishing a well? 完井中最常见的完井方法是什么？
The perforated casing type of completion is by far(迄今为止)the most popular method.目前最常见的完井方法是套管射孔完井。
157、what advantages(优点、好处)does the perforated casing completion have? 套管射孔完井有什么优点？
The perforated casing completion is the most economical(经济的合算的)and offers the best chance for subsequent（后来的）workovers（修井）or stimulation（激发）treatment（处理）.套管射孔完井是最经济的方法，并且为后来的作业和增产措施提供最优的条件。158、when was bullet（子弹）perforator developed（发展）? 子弹射孔枪是什么时候开始研制出来的？
It was developed in 1932 and has been in continuous（连续性的）and widespread（广泛传播）use since then.它在1932年被研制出来并被广泛应用。
159、Please explain the principle(原理、原则)of bullet perforator opertaion? 请你解释一下子弹射孔枪的作用机理？
The bullet perforator is a multi(多级)-barrel（桶状）{barrier栅栏}gun designed to be lowered into a well, positioned at the desired（渴望的）interval（间隔）and fired electrically（用电的）from surface controls.子弹射孔枪是一种专供下井用的多炮管枪，它下到预定位置后，有地面控制装置进行电点火。160、Do you know the perforating procedure(步骤)? 你知道射孔步骤吗？
Does he agree to the perforating plan? 他同意这个射孔方案吗？ He disagrees to the perforating plan.他不同意这个射孔方案.161、how do things stand（保持看法）
at the moment? 目前情况怎么样？ All goes well.万事顺利
162、when is the perforating operation finished? 射孔工序什么时候结束？ at about 3 o’clock.大概3点钟。PM=post meridiem下午 A.M=ante（meridiem=中午）163、what do we do next? 我们下一步的工作是什么呢？ Pull the perforator out of hole.起出射孔枪。
164、which one is moved in to perform(表演=play)the next work? 采用哪种设备进行下一步工作？
A service(1.服务2.检修)rig(well service unit)is moved in to perforate, run tubing, and prepare for pumping the well.利用修井机来进行射孔、下油管、做油井抽油准备。
六、地面设备及安装
165、Do you use a drilling rig or a workover rig for completion and workover operations? 你使用钻机或者修井机进行完井或井下作业吗？
On the new conventional wells, a drilling rig is released（放架子）and operations are completed with a workover rig.在新的常规油井中不用钻机，而用修井机。166、what types are workover rigs divided into? 修井机分为几类？
Two types：tractor hoist（升降机）and truck mounted(车载)rig.两种类型：履带式作业机和轮式车载作业机。167、who operates the workover rig? 谁操作修井机？
Driller operates the workover rig.司钻操作修井机。
168、what functions(功能，作用)does a workover rig have? 修井机有哪些功能呢？
One of the main functions is pulling and running the string（管串）.它的一项主要功能是起下管柱。
169、Does driller know the main characteristic（特性）parameters(因素，参数)of the workover rigs? 司钻知道修井做业机的主要特性参数吗？ What characteristic parameter does this oil well have? 170、what is the engine（发动机）power? 发动机功率是多少？
The engine power is 268kw.=kilowatt 171、where is the workover rig made? 修井机是哪里制造的？ The workover rig is made in china.172、what is its weight? 它的重量是多少？ Totally 55t=ton。总共55吨。
173、how does the engine work? 发动机运转的怎么样？
The engine normally works all the time.发动机一直运转正常。
174、why did this engine suddenly stop? 为何发动机发生突停？
There is the trouble with high pressure fuel pump.高压油泵出了问题。
175、what does rig capacity mean? 作业机的承载能力指的是什么？
Rig capacities are commonly spoken of in term of（依据，由于）depth rating with a particular(特别的)size tubing,usually 2 7/8 in.（two and seven over eight）176、what is the maximun lifting speed of the workover rig ? 修井机的最大提升速度是多少？
The maximun lifting speed of the workover rig is one meter per second.修井机的最大提升速度为每秒1米。
177、which parts do the truckmounted(轮式车载)rigs consist of? 车装修井机有哪些部分组成？
The truckmounted rig mainly consist of a self-propelled（自推进）chassis（底盘）,a mast（井架）, a water circulating（循环）system,hydraulic（液压）system,an angle（角度）drive,a winch（绞车）,a water brake（刹车）,a brake cooling unit,a rotary table drive, and a drller’s console（操作台）.车装修井机主要由自走底盘、井架、水循环系统、液压系统、角传动装置、绞车装置、水刹车、刹车冷却系统、转盘传动装置及司钻操作台组成。
178、Do you know what the maximun static(静止)load of the mast=derrick（井架）is ? 你知道井架的最大静载荷是多少吗？ The maximun static load of mast is 600KN.井架的最大静载荷是600千牛。
179、what are the dimensions of the drum? 滚筒的规格是多少？
Its diameter（直径）is 345mm and the length is 696mm.Parameter(参数)它的直径是345毫米，长为696毫米。
180、please tell me the dimensions of the brake drum? 请告诉我刹车滚筒的规格尺寸。
The diameter of brake drum is 970mm, its length is 210mm.刹车滚筒的直径是970毫米，长度210毫米。
181、what is the maximun tension（拉力）of the fast line? 快绳的最大拉力是什么? The maximun tension of fast line is 114KN。快绳的最大拉力是114KN.182、what features（特征、特点）have the workover rigs? 修井作业机有什么特点？
The workover rig has the following features.修井作业机有以下几项特点。
A.special chassis driven by front and rear（后部）axles(轮轴).专用底盘，前后桥驱动。
B.both workover unit and self-propelled carrier use one engine with high power efficiency.修井装置与自走式底盘共用一台发动机，发动机效率高。
C.allison（姓氏，阿里逊）hydraulic transmission（传动）features flexible（灵活的）and stepless(无级的)shift(换挡、倒班),the gear（齿轮）is shifted automatically when travelling and by manually(手动，人工的)air control when service.Rear（后面的，后置的，front 的反义词）tear（眼泪，撕裂）gear（齿轮）
阿里逊液压传动箱柔性传送无级变速，井口对正好，车辆行驶时自动换挡，修井时人工气控换挡。
D.winch drum reels(vt缠，卷)and arranges（分类安排）wireline（钢缆、测井电缆）without any special apparatus（仪器，器械）.绞车滚筒无需排绳装置、自动缠绳、排绳。
183、which factors（因素）does rig capacity（性能，容量）depend on? 钻机的性能取决于什么因素？
Rig capacity depends upon a number of factors , principally（重要的，首要的）,braking capacity, derrick=mast（井架）capacity,and drawworks=winch（绞车）horsepower.作业机的性能取决于很多因素，主要有：制动能力，井架承载能力和绞车功率。184、what is the prime（首要的，主要的）consideration for rig selection? 选择作业机的主要因素是什么？
Braking capacity is the prime consideration for rig selection.制动性能是钻机选择的主要考虑因素。
185、what fuel（燃料）does the engine consume（消耗）？ 发动机主要消耗什么燃料？ The engine consume diesel.发动机主要使用柴油。
Kerosene煤油 gasoline汽油 diesel 柴油 crude oil 原油engine oil 机油 gear oil 齿轮油
Hydraulic fluid 液压油 grease 润滑脂 thread compound丝扣油
drive oil传动油aircraft fluid航空液压油 brake fluid 制动液
186、how much fuel does this engine consume every day? 发动机每天消耗多少燃料？
On an average,the engine consumes 100 liters every day.Arrange 分类安排 average平均 orange桔子 每天平均消耗100升。
187、why is unusual noise（噪音）heard in operation of the engine? Normal正常 abnormal不正常 usual正常 unusual不正常 为什么发动机的运转声音不正常呢？ Because there is a trouble with the engine.因为发动机有故障了。Trouble=fault故障 188、when will the engine be started? 发动机何时启动？
The engine will be starting to run in half an hour.发动机半小时后将被启动。
7/8 seven over eight 1/2 one over two 189、need we start the engine now? 需要我们现在启动发动机吗？
Yes，now the engine needs starting to get warm 是的，我们需要启动发动机来进行暖车。190、why has the equipment stopped? 为什么设备熄火了？
Because the equipment has been out of use.因为设备已经报废了。Be out of use(超过使用寿命了)191、does the new machine work better than that old one? 那台新机器比旧的那台运行好吗？
The new machine is not any better than that one.新的不比旧的好。
192、how do you solve the problem? Solution ,n.解决
solve.vt 解决 你怎么样解决那个问题？
New machine will be used to replace（替代）the old ones.将用新机器替代旧机器。
193、what can i do today?
我今天能做点什么呢？
You should repair the power equipment in time.你应该及时把动力设备修好。In time 及时 on time 按时 194、when was the workover rig put into(投入)operation? 这台修井机何时投入运行？
The workover rig was put into operation last year.这台修井机去年投入运行的。195、who operates this new machine? 谁操作这台新机器？
They will let you operate this new machine on condition that you follow the operation rules(规则).在你遵守操作规则的条件下，我们将允许你操作机器。196、has the equipment been lubricated? Lubricator 防喷管 lubricate 润滑 设备进行润滑保养了吗？
The equipment has been well lubricated.设备已经润滑保养得很好了。
197、how fast does the truckmounted rig travel? 车载钻机能跑多快？
It travels on the road at speed 50km/h.在公路上可以飙到50公里/小时。
It travels on the road at speed of tortoise(乌龟)
198、when do you intend to use the air compressor(压缩机)? Compress vt 压缩 compressor 压缩机 press 按住，压 pressure 压力 pull拉 push推 你准备什么时候使用空气压缩机？ Do will the air compressor have been repaired before the end of the month, otherwise we won’t be able to get to work on time.Otherwise 否则，不然，可做连词
空压机必须在月底之前被修好，否则我们将不能按时开工。199、how do you maintain(保养，维持)the lubricating system? 润滑系统如何保养？
We inspect（检查）the lubricating system periodically(定期地，周期地).Inspect 检查 insect 昆虫 我们定期对保养系统进行检查。200、can you operate the equipment? 你能操作这台设备吗？
Yes，such equipment is easy to operate.是的，这个设备操作很简单。201、how does the pump run? 这台泵运转如何？
This pump has been running very well for three months.这三个月以来，泵运转的非常好。202、where does the workover rig park? 修井机停那？
The workover rig parks in front of（在....前方）the well head.修井机泊在井口前面。
In the front of 在...的前部，前者属于后者内部范围内 In front of 在...的前部，前者不属于后者范围内 Table is in the front of room.trees are in front of the room.203、how many pieces(件)of equipment are there on this well site（井场）? 这个井场有多少设备？ Five sets.5台.204、what are they? 它们是什么？
One workover rig , two truckmounted boilers,two cementing trucks.Boil煮沸 boiler 锅炉，烧水壶 205、Is there any tanker on the well site? 井场是不是有罐车？
The tanker is on its way to the well site.罐车正在回井场的路上。
206、how many square meters does the well site take? 井场占地多少平方米? Stere立方米
The well site takes 2500 square meters.井场占地2500平米。
207、would you mind moving your car? 你介意挪动你的车吗？ That’s all right。没事儿，好说。
208、where do you want to go? 你想去哪？
I want to go to the well site.Go home、here、there.其余必须使用go to +名词 我想去井上看看。
209、when will the fracturing truck be here? Tear 眼泪、撕裂 fracture 破裂 rear 在..后面 gear 齿轮 Factory工厂barrel水桶 barrier栅栏 battery电池
Please wait for moment,the fracturing truck will be here in a minute.(立即，马上)请稍候，压裂车稍后即到。
210、time’s rather pressing,please drive faster.时间紧，开快点。
Please be at ease（放松）,I’m sure we will arrive（go）there on time.放松，我敢打保票，准点到。
211、how many kilometers does this truck make per hour? 卡车的时速是多少？
This truck makes 70 kilometers an hour.卡车时速70公里/小时.2013.1.17 8：00-11:00
212、how many pieces of equipment are there on the well site? 井上有多少台设备？
A crane（起重机=derrick）,and a dozer（推土机）.井上有一台吊车，一台推土机。
Boiler锅炉车 cementing truck 水泥车 truckmounted rig 车载钻机
213、are there any big tanks on the well site? 井上有大罐吗？
There are five big tanks on the well site.井上有五个大罐。
214、what is the volume(体积)of this tank? 这个罐的体积有多大？
The volume of this tank is 40 stere(立方米)。
这个罐的体积为40立方米。Stere 立方米 square meters平方米
215、will you please measure(测量)the height（高度）of the tank? 请你测量一下罐的高度？
The height of the tank is about 5 meters.罐的高度约为5米。
216、what are you going to do? 你将要去做点啥？
We are going to load the truck with tongs（大钳）,slips（卡瓦）and elevators（吊卡）.Tubing elevator油管吊卡 pipe elevator钻杆吊卡 我们将把大钳、卡瓦和吊卡装上车。
217、where does the spanner(扳手)go? Hammer榔头 spanner 扳手screwdriver螺丝刀 扳手放哪了？
The spanner goes on the bottom shelf.扳手放在架子的底部了。
218、how are things going? 事儿怎么样了？ All things went well。一切顺利。
219、what’s going on? 发生什么事了？ The pump failed to work.泵出故障了。Fail to do sth...未能做某事。
220、what time will the cement truck come to the well site?
When will the cement truck come to the well site? 固井车什么时候到井？Boiler 锅炉车 truckmounted boiler车载锅炉 cement truck 水泥车 At about 10 o’clock am.大约早晨10点钟左右。Am早晨
pm 下午 221、how much does this equipment weigh? Weigh.vi.称重 weight.noun.重量 I don’t know the exact（准确的）weight.我不清楚确切的重量.222、How long will it take you to finish installing the workover rig? 安装修井机大约需要多长时间？
It takes sb sometime to do sth.花费某人时间去干某事。Install 安装 uninstall 卸载 Four hours is enough（足够的）.4个小时足够了。
223、what are well pullers doing? well puller 修井工 修井工们正在干嘛？ They are burying the deadmen.Bury 掩埋
他们正在埋绷绳锚。
224、have the installed guy lines(绳索，绷绳)? 他们安装好绷绳了吗？ No，they are installing guy lines.不，他们正在安装绷绳。
225、how many guy(牵引)clamps（卡子）did they fit on the end of guyline? 他们在绷绳尾部安装了多少个绷绳卡子呢？ Five clamps are fitted on each line.每条绳安装5个卡子。
226、how many types of masts are used with production rigs? Mast = derrick.井架
采油作业机使用哪几种类型的井架？
Two types: single(单身的，独自的)and double pole（杆）mast.The conventional single.两种类型：单杆架子和双杆架子，最常见的事单杆架子。227、what is this figure(计算，图解)? 这幅图解的内容是什么呢？
Figure 2 represents(体现)a typical(常见，典型的)power train situation（位置，形势）medium（中等的，媒介）depth（深度）workover rig.这是中等深度修井设备的典型传动图。228、have we got any other work to do?
for a 我们还有其他工作要去做吗？ Please pull the guyline tight.请将绷绳拽紧。
229、what shall i do next?or what can i do for them next? 我下一步应做点什么？
Put the hydraulic tongs at a distance（距离，路程）,please.把液压大钳挪一点距离。
230、what are the well pullers doing? 修井工们在干嘛？
They are changing the old wellhead to a new wellhead.他们正在把老井口换成新井口。
231、when will you complete the surface pipeline connecting(连接)? 你们什么时候能够完成地面管线的连接？ It will take our 3 hours to complete this work.将花费大约3小时的时间去完成这项工作。232、are you ready for pulling? 准备好起钻了吗？ Pooh = pull out of hole 起钻
RIH=run in hole 下钻 We will tell you as soon as we get ready.我们一准备好，就通知您。As soon as 一...就...233、does the bolt(螺栓)fit the nut（螺母）? 螺栓跟螺母匹配吗？
Yes，their threads(线，螺纹)are the same.是的，他们的螺纹是相同的。
234、do you know how the pipelines are connected? 你知道管线如何被连接吗？
This pipe is connected to the suction(抽吸)and that one over there to the discharge（流出）line.这根管子与上水管连通，那根管线与排水管连通。
七、有杆泵作业
235、how many types of lifting(举升)systems are there in your oilfield（油田）? 在你们油田有多少种举升方式？
There are sucker(吸盘、吸管)rod（杆）pumping,gas lifting,electric submersible（潜水器）pump and hydraulic pumping.分别有有杆泵、气举泵、电潜泵、水利活塞泵。
236、which pumps are by far(目前，迄今为止)the most widely used method? 目前为止，使用最广泛的泵是那种方式? Sucker rod pumps are by far the most widely used method.有杆泵是目前使用最广泛的一种方式。
237、how much percent(百分比)does sucker rod pumping account for（占...，说明）in you oilfield? 有杆泵在你们油田所占的比例有多少？
Sucker rod pumping accounts for approximately(近似，大约)80 percent of all artificial（人工的，人造的）lift wells in our oilfield.在我们油田，有杆泵大约占人工举升井的80%。
238、when did people begin to use sucker rod pumping for the production of oil? 人们什么时候开始使用有杆泵进行油田生产？
In 1859，the system now called “conventional” rod pumping was well established(建立).在1859年现在叫做常规有杆泵系统已经被建造出来了。239、what does a rod pumping unit consist of(由...组成)? 有杆泵由哪几部分构成？
The rod pumping unit consists of a brake ,a prime(原始的，最初的)motor,a gear reducer,a crank（曲柄）,a pitman（连杆，矿工）,counterweights（平衡块）,a walking beam（梁）,samson posts（支柱）,a horsehead（驴头）,a wireline hanger（悬绳器）,a polished（磨光的）rod,a stuffing（原料）box,sucker and rod pump,etc.Stuff=原料，物品 staff=员工，职工 stuffing box 防喷盒
有杆泵装置由刹车装置、原动机、变速箱、曲柄、连杆、平衡块、游梁、支柱、驴头、悬绳器、光杆、防喷盒、抽油杆、泵等部件组成。240、where are the pumping units made? 这些泵是哪里生产的？
The pumping units are made in the second petroleum machinery plant（植物，种植，工厂）.这些抽油泵是第二石油机械厂生产的。241、why do workover for this well? 这口井为何要修井作业？
Oil can not be pumped out of this well.这口井不出油了。
242、what’s the reason（理由）? What’s the problem? 问题在哪？
It is probably(可能)pump leakage（泄漏）.可能是泵漏了。
243、what’s the trouble with the well? 这口井咋啦？ Oil production has been very low recently.最近该井产量很低啊！
Recent最近percent比例 244、what’s the trouble with the downhole pump? 井下泵咋啦？
The trouble with downhole pump is in plunger(活塞).井下泵的问题出在活塞上。Plug vi塞 plung 塞子 lung肺 plunger 活塞 245、why doesn’t the well run? 为什么井停了？
The unit would not run ,because something had gone wrong with the casing.这口井没有运转起来的原因在于套管有故障了。Go wrong with(问题在于...)246、what are the conventional failures of the rod-pumped well? 有杆泵的最常见故障是什么？
The conventional failures of the rod-pumped well involve a pump leakage,a sand production ,a paraffinning,check valve failure(standing/travelling),sticking piston,and parted rods.Piston=plunger活塞 strict 严格 stick棍、粘。Stuck 过去分词，卡钻Steak牛排
抽油机的常见故障包括泵漏失、出砂、结蜡、游动凡尔和固定凡尔卡、活塞卡、抽油杆断脱等。
247、when was the pump run down? 这台泵何时下井？
The pump was run down on April 27 ,1997.1997年4月27日该泵下井。248、how long did the pump run? 此泵运转多久了？ The pump ran three hours.此泵运转3小时了
249、how long is the operation life of the sucker rod pump in this well? 这口井的有杆抽油泵的运转寿命是多少？ Two hundred days.200天。
250、do you know the data of this well? 知道这口井的资料吗？
Yes，i have read the workover plan,pump depth is 1473ft,pump size 2.75in,speed 8 spm,and stroke 100 in.是的，我看过作业设计，泵挂1472ft，泵径2.75in，冲数8次/分，冲程100in。
完井液与修井液
251、what is a completion or workover fluid? 什么是完井液或修井液？
A completion or workover fluid is a fluid placed against the producing formation while performing such operations as well killing,cleaning out,drilling in ,plugging back,controlling sand, or perforation.完井或修井液是对生产层进行压井、洗井、钻进、上返，控制油层或射孔作业时使用的流体。252、what are the basic functions of workover fluid? 修井液的基本功能有哪些？
The basic functions of a workover fluid are to facilitate(促进)movement of treating fluids to a particular point downhole , to remove solids from the well,and to control formation pressure.修井液的主要功能是它容易注到井下指定地点，从井底将岩屑携带出来以及控制地层压力等。
253、Does using workover fluid cause formation damage? 使用修井液会损伤地层吗？ It is possibity is little.可能性比较小。
254、which point should be considered in selecting a workover fluid? 选择压井液时需要考虑哪些因素？
We should consider the fluid density（密度）, solids content , filtrate(滤失液)characteristics, fluid loss(损失),viscosity-related characteristics, corrosion products, mechanical(机械的)considerations, and economics.
第三篇：在国外呆了八年,总结的英语学习方法
在国外呆了八年，总结的英语学习方法
说起学英语，这真是个难度活，费时费力不说，结果还总是不尽人意。可是很少人觉得这是技巧活，都埋着头苦学，大家一路以来都照着初中老师，高中老师的方法顺理成章地学着，我也是经历了这漫长的被教育过程，小时候背了很多课文，可现在没半点有用，以前翻开课本后的单词表开始逐一背诵单词，可是也是效率低下。
其实对于任何一个项目，如果你知道你将会投入超过半年的时间去完成，那就值得在开始的时候，仔细地思考一下“方法”，这样做绝对值得，它会在今后为你省很多功夫，并且在以后加微信usa_az的过程中随时依进展情况而修改。像我们的中小学英语教育养成的方法：背单词，听写，背课文，这一阶段一学下来就是10来年，稀里糊涂有了这种习惯，又不去创新别的方法，于是到了大学4级，托福,GRE也一直沿用这种方法，虽然自己也意识到效率不高，但也没积极想办法去改进。
我要说的这种方法，是我在国外呆了近十年载后发现我以前学英语时应该做的调整，前段时间看了“漏屋”老师写的《告诉你外语学习的真实方法及误区分析》，觉得我和他的观点不谋而合，他为我自成的方法提供了理论上的支持，在这里我很感谢“漏屋”老师所做的详细研究。我们都同意“两点”至关重要的因素：
1）首先靠听力，别去依赖字形，别去训练写，一切一切从听开始
2）为自己提供“i+1”的学习环境（这里借用漏屋老师的说法，简单说“i+1”的意思是：i代表你现在的程度，+1代表永远只去学之比你程度高那么一点点的新东西）。
首先说第一点： 为什么只强调听，而忽略“说”“读”“写”。
我们人类生下来，语言的教学本来就是靠口口相传的，大家也都知道语言环境的重要，现在请你回想我们以前的学习方法，翻开单词本，首先单词的拼法映入眼帘，后面跟随着汉语解释，这样我们接触的顺序是：
一，视觉辨识拼写法，来识别单词
二，头脑中翻译中文意思
三，思考语音（这第三步有人读得出来的会默默反应其读音，有人读不出来的就跳过了）。长期日积月累，你再听到这个单词，怎么能快速反应其意思呢，这造成我们在做听力的时候，即便竖着耳朵，高度集中精力也反应不过来，原因是你根本没和语音“第一时间亲密接触”过，你的第一接触在视觉。所以我认为加微信usa_az我们学英语，要刻意地屏蔽掉视觉，只靠听觉。不要说这个词我听不懂，请你给我看，这是错误的。而是我听不懂，就请你用我能懂的词去解释给我听，这就涉及到第二个问题：去听什么，这又是一个非常关键的问题，下面我要讲的是去听“i+1“的东西。
第二点： 去创造”i+1"的语言环境。
这是一个非常值得思考的问题，怎样去创造？大家语言程度有高低，比如有人程度很低，就像刚开始学英语一样，只知道apple和pear，那他的+1可以去加一个cherry;如果某人程度很好，他的程度在arthritis, tendon,那他的+1可以去加一个acetabulum(关节窝)。我不希望大家去共学“新概念”，共学“4级课本”这种针对大众的，不是针对你个人的，我希望你去添加你自己想学的词汇。就刚才的arthritis来说，关节炎这个意思对很多人来说很少用，但对一个有关节炎在国外看医生的人来说，就很有用，他一定要描述给医生听他生什么病。
那所以怎么创造自己的+1，我们借助录音，这方面的软件现在也很多。录音时，录你认为最能刺激你听力的东西，你可以唱歌，可以自己翻译，或让朋友亲人上阵。试想如果朋友恶搞你，录一个放屁声，再告诉你fart,你以后能忘记这个词吗？当然也不是所有词都那么有意思，之后就是靠多听来刺激，完全抛开扔掉书本，反正你有录音存证了，书上写的orange难道和你录的orange不一样吗？当然是一样的，所以书本那种死的东西不再去看也罢。别去想这个词怎么写，也不用急着说，只是训练听到就马上反应出来这个过程。
第四篇：在国外用餐的常用餐厅英语
在国外用餐的常用餐厅英语 1.寻问餐厅
Could you recommend a nice restaurant near here? 是否可介绍一家附近口碑不错的餐厅? Is there a Chinese restaurant around here? 这附近是否有中国餐厅?
I want a restaurant with reasonable prices.我想去一家价位合理的餐厅。
Are there any inexpensive restaurants near here? 这附近是否有价位不贵的餐厅?
I'd like a quiet restaurant.我想去一家不会吵杂的餐厅。
Do you know of any restaurants open now? 你知道现在那里还有餐厅是营业的吗?
I'd like a restaurant with cheerful atmosphere.我想去一家气氛欢乐、活泼的餐厅。I'd like to have some local food.我想尝试一下当地食物。
Could you recommend that kind of restaurant? 是否可建议这一类的餐厅? Where is the nearest ltalian restaurant? 最近的意大利餐厅在那里?
Where is the main area for restaurants? 此地餐厅多集中在那一区?
2.餐厅预约
Do I need a reservation? 我需要预约位子吗? Nine o'clock should be O.K.9点应该没问题。
I'd like to reserve a table for three.我想要预约3个人的位子。
what do you have for today's special? 今天的推荐餐是什么? We are a group of six.我们共有6个人。
We'd like a table with a view of garden.我们想要面对花园的位子。
We'll come around eight o'clock.我们大约在8点到达。
It's O.K.Your name, please.没问题。请给我你的名字。
How can I get there? 我要如何才能到达餐厅? My name is Jessica Yang.我的名字是洁西卡．杨。
I'd like to reserve a table for two at seven tonight.我想要预约今晚7点2个人的位子。Do you have a dress code? 餐厅是否有任何服装上的规定?
I'm sorry.We have so many guests this evening.我很抱歉。今晚的客人相当多。
ould the ladies wear formal dresses? 女士是否需着正式服装?
How long is the wait? 我们大概需要等多久? No jeans, please.请不要穿牛仔裤。
3.餐厅点餐篇
May I have a menu,please？ 请给我菜单。
May I order,please？ 我可以点餐了吗？
Do you have a menu in chinese？ 是否有中文菜单？
What is the specialty of the house？ 餐厅最特别的菜式是什么？
Would you like something to drink before dinner？ 在用晚餐前想喝些什么吗？
Do you have today`s special？ 餐厅有今日特餐吗？
What kind of drinks do you have for an aperitif？ 餐厅有些什么餐前酒？
Can I have the same dish as that？ 我可可以点与那份相同的餐吗？
May I see the wine list？ 可否让我看看酒单？
I`d like appetizers and meat(fish)dish.我想要一份开胃菜与排餐(鱼餐)。
May I order a glass of wine？ 我可以点杯酒吗？ I`m on a diet.我正在节食中。
What kind of wine do you have？ 餐厅有那几类酒？
I have to avoid food containing fat(salt/suger).我必须避免含油脂(盐份/糖份)的食物。
I`d like to have some local wine.我想点当地出产的酒。
Do you have vegetarian dishs？ 餐厅是否有供应素食餐？
I`d like to have Frence red wine.我想要喝法国红酒。
How do you like your steak？ 你的牛排要如何烹调？
Could you recommend some good wine？ 是否可建议一些不错的酒？
Well done(medium/rare),please.全熟(五分熟/全生)。
4.餐厅用餐
Could you tell me how to eat this？ 请告诉我要如何食用这道菜？
Is coffee included in this meal？ 有咖啡做为附餐吗？
Could you pass me the salt（pepper）? 请把盐（楜椒）传给我。May I smoke？ 可以抽烟吗？
I'd like a glass of water, please.请给我一杯水。
My order hasn't come yet.我点的食物还没来。
May I have a bottle of mineral water？ 请给我一瓶矿泉水。
This is not what I ordered.这不是我点的食物。
Uncarbonated mineral water, please.请给我不含碳酸的矿泉水。Check, please.麻烦请结帐。
May I have some more bread, please.请再给我一些面包。Can I pay here？ 可以在这儿付帐吗？
I'd like a dessert, please.请给我一些甜点。
We like to pay separately.我们想要分开算帐。
What do you have for dessert？ 甜点有那几种？
I think there is a mistake in the bill.帐单有一些错误。
May I have some cheese？ 可以给我一些芝士吗？
Could you check it again？ 可不可以麻烦再确认一次帐单？
What kind of cheese is this？ 这是什么口味的芝士？
Can I pay with this credit card？ 可以用这张信用卡付帐吗？
May I have just a little of it？ 可以给我一点这个吗？
May I have the receipt, please.请给我收据。
Can I have some fruit instead of the dessert？ 可不可以不要甜点改要水果？ 5.快餐餐厅用餐篇
Will you be eating here or is this to go(take out)？ 在这里用餐或带走？ I'll eat here.在这里用餐。
Take out,please.带走。
I'll have a small hamburger,milk,and one large order of French fries.请给我一个小汉堡、牛奶和一份大份薯条。
Can I sit here？ 我可以坐这里吗？
Can I have a hot dog,please？ 请给我一份热狗。
With ketchup or mayonnaise？With ketchup,please.加蕃茄酱或美乃滋？请加蕃茄酱。
How about onions or mustard？Yes,please.要加洋葱或芥末吗？好的。
A sandwich,please.请给我一份三明治。
Which would you like for bread？White or whole wheat？ 你想要什么口味的面包？白面包或全麦面包？
Whole wheat,please.请给我全麦面包。
I'd like roast beef with Swiss cheese,tomato,and lettuce.我要烤牛肉加瑞士乳酪、蕃茄与莴苣。
Can I take this seat？ 我可以坐这个位子吗？
Where can I get a knife and fork？ 我在那里可以拿到刀与*？
Bourbon with soda water,please.请给我波本酒加苏打水。
Could you show me something to certify your age？ 可否出示能证明年纪的文件？
第五篇：出国英语之打出租车的英语怎么说
出国英语：打出租车的英语怎么说
打出租车英语怎么说
I need a cab
打出租车常用英语词汇：
as soon as possible 尽快
address 地址
sidewalk 人行道
out front 在大楼前面；在房子前的街上
Please step on it 请开快点
Keep the change 不用找零了
打出租车常用英语句型：
I'd like to order a taxi...我想预定一辆出租车...I need a cab as soon as possible please.请尽快给我派一辆出租车。
I'm standing out front on the sidewalk.我就站在门前的便道上。
Could you help me put the luggage in the trunk?
你能帮我把行李放到行李箱里吗？
Take me to the airport.送我去机场。
I'm really in a hurry,so can you take the quickest route please? 我实在是很赶时间，您能尽量开最快的速度吗？
I'm in a hurry.Please take a shortcut.我赶时间，请抄近路。
How much is the fare please?
请问多少钱？
I need a receipt.我要发票。
点击咨询 