第一篇：留学生英文申请书及部分成绩单翻译样板
11th April, 2010
Dear Sir or Madam:
My name is Qin Zihao and from china.I am writing in the hope that I may obtain an opportunity of my further study to get the PhD degree in Ballistics and Aerodynamics(СМ-3)of Special machinery faculty.I have studied in school of Mechanical Engineering in Nanjing University of Science and Technology(NUST)for nearly four years, majored in Special machine.I will get my bachelor's degree on June 2010.During my college years, I spent all the semesters in diligent and highly effective study.I got a high GPA that placed me in the top 10% out of all the students in my major, winning scholarships of the department almost every year.And I was selected in master-and-doctoral program of our school without entrance exam.The major courses that interested me most included: Theoretical Mechanics, Strength of Materials, Control Engineering, thermodynamics, Computer Language and Programming, Mechanical Design, etc.I believe with my solid foundations, and keen interest in this field, I can succeed in my graduate studies.I wish to start my study in September 2010 and plan to complete my doctor degree objective in 5 years.What I should mention that is, I’m the candidate of the China Government Scholar which is operated by the China Scholarship Council(CSC)under the Ministry of Education of People’s Republic of China.It covers tuition, living expenses and traveling fees.By the way, please give me the bill of the entire fees.It would be great if you take me for consideration and give me a chance, and I'm very willing to start discussion with you about more correlative matters.I'm looking forward to hearing from you soon.Best regards,Yours sincerely,Qin Zihao
Department of power engineering
Nanjing University of Science and Technology
Email:QinZihao1215@163.com
Resume
Name: Qin ZihaoGender: MaleBirth date: Dec, 1988Mobile Phone: 86-*** E-mail: qinzihao1215@163.com
Address: School of Mechanical Engineering, Nanjing University of Science & Technology(Zip:210094)
Personal information：
Education：
2006/9-2010/6Bachelor’s degree of Special machine,Nanjing University of science & technology
2003/9-2006/7Middle school of Shangshiqiao in Xinyang City
Skills：
English: Good at listening and reading , passed CET-4 Computer Abilities:
Experienced in VB language
Experienced in AutoCAD, SolidWorks
The grade three of National Computer Rank Examination(software)
Awards and Honors:
First-class Scholarship in NUST for once Second-class Scholarship in NUST for fourth Third-class Scholarship in NUST for once All-A student(2009)
Self-Summary：
Personality: Good team spirit, Diligence, Responsibility, enthusiastic,strong-willed, self-confidence.Transcript
第二篇：部分机械英文图纸翻译
部分机械英文图纸翻译
1、REVISED DIMENSIONS TO MACHINE PART CORRECTLY 经修订的机械零件尺寸正确
2、SURFACE FINISH OF MACHINED SURFACES MUST BE 3.2 Ra OR BETTER, UNLESS OTHERWISE SPECIFIED.机加工表面必须3.2Ra或更好的表面光洁度，除非另有说明。
3、UPDATED DIMS：更新后的尺寸
4、UPDATED GD&T TO SIMPLIFY MACHINING PROCESS 更新后的尺寸可以简化机械加工工艺
5、REMOVED CHAMFER, UPDATED TITLE BLOCK 删除倒角，更新标题块。
6、REVISED DIMENSIONS TO MACHINE PART CORRECTLY 经修订的机械零件尺寸正确
7、CHANGED DEPTH OF SLOT：槽深度变化
8、ADDED GD&T TRUE POSITION SYMBOL TO M10x1.5 TAPPED HOLES：新增 正确的形位公差符号为M10x1.5螺纹孔
9、DRAWING TITLE：图纸标题
10、ALL UNSPECIFIED CAST RADII MUST BE 12mm.铸件未注半径均为R12
11、CAST DRAFT ANGLE TO BE 3°MAXIMUM, UNLESS OTHERWISE SPECIFIED.未注拔模斜度最大3°
12、ALL CAST DIMENSIONS ARE POSITIVE(+)DRAFT, UNLESS OTHERWISE SPECIFIED.铸造尺寸往+方向
13、SURFACE FINISH OF CAST SURFACES MUST BE 12.5 Ra OR BETTER, UNLESS OTHERWISE SPECIFIED.铸造表面必须Ra12.5或更好的表面光洁度，除非另有说明。
14、REMOVE ALL FLASH AND SHARP EDGES AND PARTING LINE FLASH FROM CASTING.从铸件去除所有闪光和锐边和分开线闪光。
15、WALL THICKNESS 8.5 MM：壁厚8.5毫米
16、CASTING TOLERANCES：铸造公差
17、VENDOR TO PAINT MATTE BLACK PRIOR TO MACHINING：供销商在加工前涂上无光泽黑色、ALL DIMENSIONS ARE(+)DRAFT：所有尺寸为+草案。
19、ALL DRAFT ANGLES TO BE ：所有的拔模斜度是 20、CASTING SURFACE ALLOWANCE TO BE 3mm.铸件表面余量为3 MM
21、SHARP EDGES NOT PERMISSABLE：不可允许的锐边
22、BOLT CIRCLE：螺栓分布圆
23、ECO NO.：工艺更改编号
24、BEARING SUPPORT：轴承座
25、KEYWAY TO BE CENTERED WITHIN 0.13mm OF BORE CENTERLINE.：键槽位于基准孔中心线0.13mm 范围
26、DUCTILE IRON：球墨铸铁
27、CHANGE KEYWAY NOTE: BORE WAS SHAFT 变化键槽注意：孔径为竖
28、WALL THICKNESS & RIBS = 3mm:壁厚及肋骨= 3毫米
29、CORNER RADII = 1.5mm, FILLET RADII = 3mm 圆角半径= 1.5毫米，圆角半径= 3毫米 30、ALL DIMS.ARE FINISHED SIZES,(FINISH STOCK NOT INCLUDED)所有尺寸为成品尺寸，（完成库存不包括在内）
31、CYLINDER BORE SURFACE FINISH: 缸径表面处理
32、CYLINDER BORE TO BE COATED WITH AN INORGANIC, WATER SOLUBLE OIL：缸径待涂一种无机，水溶性油
33、THAT DOES NOT CONTAIN PARAFFIN, CHLORINATED PRODUCTS, HEAVY ESTERS, SILICONE, SILICATES, TEFLON, OR MOLY DISULFATES.不包含石蜡，氯化物产品，重酯，有机硅，硅酸盐，聚四氟乙烯，或钼DISULFATES。
34、PARTS TO BE PACKAGED: 要包装配件
35、OUTER BOX TO BE OF SUFFICIENT STRENGTH TO PREVENT SHIPPING DAMAGE.外箱给有足够的力量阻止运输损坏。
36、SEE SHEET #1 FOR REVISIONS: 修订本，请参阅＃1
37、GEAR COVER GASKET SURFACE：齿轮室盖垫表面
38、VENDOR & DIE ID：供销商标示
39、APPROXIMATE LOCATION：大概位置 40、Actual value: 实际值
41、Remark: 备注
42、First Article Inspection Report: 首件检验报告
43、Isometric VIEW: 轴测图
44、CASTING TO BE ANNEALED AND FULLY STRESS RELIEVED.铸造将予应力退火和时效处理。
45、FLATNESS WITHIN：平面度
46、CASTING ADAPTER：铸造适配器
47、MATERIAL SPEC：材料规格
第三篇：宾夕法尼亚大学学位证成绩单翻译
宾夕法尼亚大学 经校理事会授权并由学院推荐
今授予
XX
博士学位
以及所有相关权利、荣誉和特权 作为证明，附上授权人员签名 2011年8月12日于费城
272周年）
校长（签字）
院长（签字）（暨宾夕法尼亚大学成立 副校长兼校务秘书（签字）
宾夕法尼亚大学
成绩单
姓名 学号
签发日期
学院： 系别：
学位课程： 专业：
XX
XX-XX-9292
2011年8月22日
课程水平： 出生日期：
研究生
1975年12月31日
*****学术课程*****
文理学院
文理研究生院 博士 经济学
*****授予学位*****
博士学位
2011年8月12日
论文导师：DIEBOLD, FRANCIS X 论文题目：《XXX》 博士资格评估通过日期：2005年8月25日 博士候选人考试日期：2010年10月21日 博士口语考试通过日期：2011年6月22日 博士论文答辩通过日期：2011年6月22日
助理教务长（签字）
2011年8月23日
第四篇：韩国留学生翻译
Foreign Language School Welcomed the Second Group of Korean Students
Time：12-09-11 15:53:53 Author：Wang PengFrom：Foreign Language SchoolOn the morning of 10th September,Foreign Language School held a welcoming ceremony for the second group of Korean students.The Korean students,Ding Duoyun and Piao Yushuai,majoringin Chinese at Korean Rende University,will learn Chinese for half a year in our school.The leaders and students from Foreign Language School expressed a warm welcome for the two Korean students’ arrival at the welcoming ceremony.Ding Duoyun and Piao Yushuai introduced themselves.And our students majoring in Korean introduced the Chinese traditional culture with Chinese and Korean.At last,all the teachers and students sang “My Singing”,making the Korean students feel the the enthusiasm of the teachers and students.Foreign Language School will educate the Chinese knowledge and Chinese traditional culture according to the basis of the two Korean students’ Chinese language,to improve their Chinese proficiency and deepen their understanding of Chinese culture.Executive Editor：Publicity and United Front Department
第五篇：留学生英文求职信
CURRICULUM VITAE
Name: Dahong Xu(Rainy)
Address: 601-3-8 Gudang District, Hangzhou, Zhejiang, China
Tel(mobile):01234567890
E-mail:wdjlw@wdjlw.cn
Education
Guildford College of F.and H.E.May--June XX Short course in Culinary Arts and English
Stoke park
Guildford
Surry, England
Hangzhou Zhongce Vocational School Sep.XX—Jun.XX Culinary Arts
Hangzhou Fengtan Middle School Sep.XX—Jun.XX General School Studies
Exams Taken
Hangzhou Zhongce Vocational School End of semester’s exams XX--XX
(English, Chinese, Math, Operations&theory)
Hangzhou Fengtan Middle School Final exam XX
(English, Chinese, Math, Science)
End of semester’s exams XX--XX
(English, Chinese, Math, Science)
WORK EXpERIENCE
practical experience during studies
personal Interests and Hobbies:
In the free time I enjoy reading novels if it is interesting I will keep on reading.And I like playing with animals especially dogs and cats.Also I enjoy watching films may be all the kinds of the films except war and action, and listening to the international music, but my favorite thing is learning languages.References:
Kevin Hooper
Tutor
Guildford College
Guildford
Surry, England
GU1 1EZ
点击咨询 